[Diy_efi] How many Bits for PWM injection driver?

[Dave Dahlgren]

if the clock period is 16 ms. it ought to work ok that is all that a haltech
has/had and they ran fine. closest increment you could tune was 0.0625 ms.
Accell /DFI was about the same every step was 0.064 ms. In the DFI stuff I used
to work with you acutally enetred steps. #'s from 0 to 255...
Dave

Les Dittert wrote:
> 
> I tried several archive searches, but didn't see any mentioning if
> 8 bits would be too coarse. My gut feeling is that I could live with
> 256 steps.
> Would it be noticeable during mild throttle settings?
>


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi