[Diy_efi] sequential injection timing

Programmer nwester at eidnet.org
Thu Aug 1 19:56:51 GMT 2002


"Optimizing" means different things to different situations.
Peak HP and torque may not be optimized fuel economy. Sometimes it is--but
usually, not. Optimizing a calibration can take literally months--and then
when the engine is worn--it's time to start over.
Try optimizing something correctly when fuel changes 4 times a year, ambient
temps change 100 degrees and too many cheeze burgers take a 1/100 out of
your quarter mile...you're constantly tuning till you're happy with it.

Lyndon. ; )
----- Original Message -----
From: "Brian Michalk" <michalk at awpi.com>
To: <diy_efi at diy-efi.org>
Sent: Thursday, August 01, 2002 11:57 AM
Subject: RE: [Diy_efi] sequential injection timing


> So what does "optimise" really mean?
>
> How do I know when I'm there?  What bold steps are you referring to?
>
> > -----Original Message-----
> > From: diy_efi-admin at diy-efi.org [mailto:diy_efi-admin at diy-efi.org]On
> > Behalf Of Bruce
> > Sent: Tuesday, August 01, 1995 12:54 PM
> > To: diy_efi at diy-efi.org
> > Subject: Re: [Diy_efi] sequential injection timing
> >
> >
> >
> > And you're 100% right.
> > It takes some **bold** steps and flying in the face of convention to see
> > what optimised really means.
> > Bruce
> >
> > ----- Original Message -----
> > From: <bill.shurvinton at nokia.com>
> > Subject: RE: [Diy_efi] sequential injection timing
> > I would contend that most people with EFI also do not take the time to
get
> > spot on. Many wouldn't know even what spot on was...
> > Bill
> >
> >
> >
> > _______________________________________________
> > Diy_efi mailing list
> > Diy_efi at diy-efi.org
> > http://www.diy-efi.org/mailman/listinfo/diy_efi
> >
>
>
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://www.diy-efi.org/mailman/listinfo/diy_efi


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi



More information about the Diy_efi mailing list