[Diy_efi] Fixed frequency PWM batch mode FI

[Bruce]

There was a VW guy that did an ecm that way.  I think he was firing them
every 12.5msec.
For racing/off road why not?.
So long as it's clean enough to idle, who cares?.   I think the other guy
took some heat about it not being able to work, but he said it did.
Some GMs default to that under some conditions
Bruce


----- Original Message -----
From: "Les Dittert" <lesd at earthlink.net>
To: <diy_efi at diy-efi.org>
Sent: Monday, August 19, 2002 8:42 PM
Subject: [Diy_efi] Fixed frequency PWM batch mode FI


> I have searched high and low and haven't found the answer to this
> question:
> are there any disadvantages to running the injectors at a
> fixed frequency of injection that isn't related to RPM?
> I realize that doing this in batch mode will result in some injections
> hitting a close valve sometimes and then sometimes hitting an open
> valve.
> Since some OEM fuel systems run batch mode where they fire all injectors
> at the same time
> I figured they have the same situation anyway.
> Another question:
> If using a fixed frequency you what should that frequency be?
> I'm assuming it should be something equivalent to running a sequential
> injection system at about 4000 RPM.
>
> -Les
>
>
>
>
>
>
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://www.diy-efi.org/mailman/listinfo/diy_efi
>


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi