[Diy_efi] How many Bits for PWM injection driver?

[Mike]

Do I interpret from this that the smallest pulse width (presumably
at idle and lowest revs) is 64 microseconds ?

Seems *real* small... was the system ever operating at this shirt
time period and realiably/with stability ?

Rgds

mike


At 02:29 PM 8/8/2002 -0400, you wrote:
>if the clock period is 16 ms. it ought to work ok that is all that a haltech
>has/had and they ran fine. closest increment you could tune was 0.0625 ms.
>Accell /DFI was about the same every step was 0.064 ms. In the DFI stuff I
used
>to work with you acutally enetred steps. #'s from 0 to 255...
>Dave
>
>Les Dittert wrote:
>> 
>> I tried several archive searches, but didn't see any mentioning if
>> 8 bits would be too coarse. My gut feeling is that I could live with
>> 256 steps.
>> Would it be noticeable during mild throttle settings?
>>
>
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>http://www.diy-efi.org/mailman/listinfo/diy_efi
>
>

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi