[Diy_efi] Ford Coil Plug

[Rich M]

Mike,
Unfortunately Ford are very funny about allowing 3rd parties access to
connectors unless part of a loom... I have tried to get the same one a
number of times without success.... I can only suggest some of our American
friends may be able to help, things like this seem to be a bit more sensible
over there..
Good luck
Rich

-----Original Message-----
From: diy_efi-admin at diy-efi.org [mailto:diy_efi-admin at diy-efi.org]On
Behalf Of Mike Blakey
Sent: 08 August 2002 11:15
To: diy_efi at diy-efi.org
Subject: [Diy_efi] Ford Coil Plug


I'm after locating a source for connectors for a Ford DIS coil pack. The
Ford Coil
part number is 88SF-12029-AA12V (Finis code 6860288). however, my local Ford
dealers in the UK tell me this connector is part of the wiring loom or to
get one
from a breakers yard!

This is not much good to me and I would like a NEW connector so that I can
make a
proper loom.

Does anyone know who makes these connectors or where I can get them from?

Any advice or help would be appreciated,

Thanks,



********************************************************************
This email and any attachments are confidential to the intended
recipient and may also be privileged. If you are not the intended
recipient please delete it from your system and notify the sender.
You should not copy it or use it for any purpose nor disclose or
distribute its contents to any other person.
********************************************************************

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi