Instructs for DIY_WB US KIT

[Gregory A. Parmer]

On Sat, 9 Feb 2002, pb wrote:
> I could use a set of instructions if they exists for the wide band

Check the link Steve just added to the project page called "Assembly
Guide"........
   http://www.diy-efi.org/diy_efi/projects/diy_wb/

Please notify me directly with comments/corrections/etc. I'm *not* an
electronics guru, but my WB passes the tests and seems to work fine.

Many thanks to the DIY-WB team and those who've shared their expertise,
notes, and images. I hope this page will help minimize frustration
involved in building the project.

Good luck in building yours,
-greg    The #1 "Dummy"

Greg Parmer                         Good judgment comes from experience,
Network Engineer                    and a lot of that comes from bad
Cooperative Extension &             judgment.
  College of Agriculture
Auburn University, AL               http://www.aces.edu/~gparmer/efi

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org