Jaycar 5300 LED display

[Crescent Kao]

Peter,
  You know what? You're right.. it was in the wrong location... But too late
now :) Still need a replacement :( Thanks for the heads up.


Crescent Kao
Director of Marketing and Sales
www.c-speedracing.com


----- Original Message -----
From: "Peter Gargano" <peter at techedge.com.au>
To: <diy_efi at diy-efi.org>
Sent: Monday, February 11, 2002 1:07 PM
Subject: Re: Jaycar 5300 LED display


> > > In light of some feedback I've recently received . . . .
>
> I have updated the image used for constructing the WB FMD's display PCB:
>
>   http://www.home.aone.net.au/techedge/vehicle/wbo2/fmdpcb2.jpg
>
> ... it seems a couple of people may have assembled the LM336-2.5 (REF1) in
> the wrong holes on the PCB. I hope the updated graphic image (reload it
> if it doesn't say "Rev 2" in the bottom right corner) clarifies this.
>
> One symptom of this error was that the 1.4 volt calibration point could
> not be reached.
>
> Peter.
>
> ----- End of forwarded message from owner-diy_efi at diy-efi.org -----
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org