dwell angle control

Huw Scourfield Huw.Scourfield at btinternet.com
Wed Jan 2 21:11:44 GMT 2002


Carsten, I used the complete module from a bosch reluctor system driven by a
logic signal( from a 16f877), the module worked no problem, didn't see any
reason to use anything different. If you use this you need to use the
correct coil since they are pretty much a matched set. (I believe)
    Huw
----- Original Message -----
From: Carsten Beth <>
To: <diy_efi at diy-efi.org>
Sent: 27 December 2001 14:27
Subject: dwell angle control


> Hi,
>
> I read the list since a few weeks and find it very instructive. Because
> I never post something, I want to introduce me at first.
>
> My name is Carsten Beth, I am a student of computer science with special
> interrests in integrated circuit and embedded system design. I am very
> familiar with digital systems but less with analog.
>
> My favorite hobby is to drive an repaire old motorcycles. I own a Honda
> GL 1000 from 1977 with mechanicaly controled ignition. Since last summer
> I work on a efi solution for that motorcycle. It is based on a Atmel
> microcontroler which receives signals from a hall sensor and shall
> trigger a igbt. In the moment the controler hard- and software works,
> but there are some problems regarding the ignition driver.
>
> There is the smart device from Motorola, the MC3334. The main feature is
> to automaticaly adjust the dwell angle, so the solenoid stores an
> optimum energy with low losses. Does anybody now such a device which
> drives an igbt instead a darlington and is triggered on logic level
> instead of a reluctor pickup?
>
> Best regards,
>
> Carsten
>
> ----- End of forwarded message from owner-diy_efi at diy-efi.org -----
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org



More information about the Diy_efi mailing list