Thermocouple wiring --THANKS!

[rob files]

Hi all,

Thanks for all of the responses.  I did some research (uh...probably should 
have done this before asking the question :)

The answer is to use same metal wire as used in the thermocouple (for K 
type, use nickel-chromium and nickel-aluminum).  I found a place that sells 
it by the foot (but has a $25 min order).  They also sell the connectors.

http://www.infraredheaters.com/wires.htm

Also, I found this site which says soldering connections is ok (at least 
that's how I read it).

http://www.picotech.com/applications/thermocouple.html

Thanks again,
Rob

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org