Hey my Chevy has Ford Rods !!!!!!

[elcamino73]

I think you are incorrect. The piston dwell time is the same at top or
bottom.  Dwell time will be longer with longer rods.
 It will do so by moving faster between the two points.


----- Original Message -----
From: <A79coupe at aol.com>
To: <diy_efi at diy-efi.org>
Sent: Tuesday, January 08, 2002 1:18 PM
Subject: RE: Hey my Chevy has Ford Rods !!!!!!


> Oops, my example was flawed.
>
> The extreme example is a 1.5 inch rod with a 3 inch stroke.  The piston
would be at the bottom of the bore from 90 degrees to 270 degrees.
>
> Eric Anderson
>
> ----- End of forwarded message from owner-diy_efi at diy-efi.org -----
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org