WBO2 Connector Group Purchase

[bcroe at juno.com]

Yes for the few extra bucks, go for the 1000.  

I have a couple other concerns.  Sending 10 pins
with each connector would be good, though only 
7 are used.  They are only a dime, and are the 
thing most likely to get lost or need reworking.

The other qustion is, should a special wire crimper 
be used to attach wires to the pins, and what range 
of wire size fits.  These might not be trivial issues.

I was thinking of throwing 2 1/2 kilo bucks at it, 
crimper and all.  Then offer complete harnesses
(short, long, shielded or loose, your wire/connector, 
etc) priced to break even at 100 assemblies.  
Trouble is, I would be "making a profit" if there 110 
takers, and I don't want to cause trouble.

Buce Roe

On Tue, 8 Jan 2002 09:20:22 -0500 Steve.Flanagan at VerizonWireless.com
writes:
> Bryan,
> 
> It looks like you could increase your order and receive enough 
> components to
> make 1000 connectors (vs the 714) and it will only cost you an 
> additional
> $139.
> 
> This is assuming there is enough interest in the group to buy 1000
> connectors.  
> 
> This would get the unit cost down to around $2.15 per connector, now 
> if
> everyone ordered at least 10, it would cost each person about the 
> same as if
> they were going to purchase the 5 (about $25).
> 
> Have you thought about contacting one of these companies that make 
> EFI
> systems that have WBO2 sensors with them.  Maybe they would buy your 
> extras.
> 
> 
> There was that one company in Canada, who remembers their name?


> -----Original Message-----
> From: Bryan Zublin [mailto:bzublin at zublin.com]
> Sent: Sunday, January 06, 2002 11:24 PM
> To: diy_efi at diy-efi.org
> Subject: WBO2 Connector Group Purchase

> Details of the group purchase of the Connector for NGK Wide Band 
> Oxygen (WBO2) Sensor have been posted on my web page at:
> 
> http://www.zublin.com/Sumitomo/WBO2ConnectorPurchase.htm
> 
> Regards,
> Bryan Zublin

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org