Measuring air flow

[Chad Beebe]

500 m3/hr = 294.2889 ft3/minute



-----Original Message-----
From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On Behalf
Of Greg S Larson
Sent: Thursday, January 24, 2002 2:39 PM
To: diy_efi at diy-efi.org
Subject: Re: Measuring air flow

He said per hour

On Thu, 24 Jan 2002 07:30:32 -0500 Eric Fahlgren <efahl at adams.com>
writes:
> 944Technologist wrote:
> >
> > I am looking for a bench setup capable of measuring air flow of up
> to 500
> > m³/hr accurately. Within 1% anyway. Use will be calibration check
> of AFMs.
> > What kind of gauges are out there that won't cost an arm and leg.
>
> Do you have your units right?  500 m^3 is over 17,000 cfm (good
> for roughly 12,000 HP).
>
> --
> Eric Fahlgren                            Mechanical Dynamics, Inc
> efahl at adams.com                          Ann Arbor, Michigan, USA
>
-------------------------------------------------------------------------
---
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
> quotes)
> in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
>
>
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org