[Diy_efi] Fw: DFI

[Bruce]

Doc's just standing in the corner, grinning.
I guess he and you both already knew that.
Bruce
  Well, the boat's packed, and life vests checked, so it's off to the
backroads.



----- Original Message -----
From: "rr" <rrauscher at nni.com>
Subject: Re: [Diy_efi] Fw: DFI
> The Vette module wiring is reversed from the f-body
> wiring. This is the 4 pin connector on the actual module
> interface to the ECM. The ordering is reversed.
> BobR.
> On Mon, 3 Jul 1995 10:20:51 -0400
>  "Bruce" <nacelp at bright.net> wrote:
> > Exactly like <g>
> > I wouldn't be surprised at all to find out the Vette is
> > wired backwards, as
> > compared to convention, heck they did the same thing with
> > the radiator fans.
> > I'd still start at square one, and go step by step to
> > make sure there aren't
> > two errors.
> > Bruce
> >
> >
> > ----- Original Message -----
> > From: "Mark S. Riley" <turbotuneusltd at triad.rr.com>
> > Subject: Re: [Diy_efi] Fw: DFI
> > > Like as in the pickup coil is hooked up backwards. It
> > is the small
> > diameter,
> > > external coil out of a relatively late model TPI
> > Corvette. But, I think he
> > > bought it from a parts store rather than out of a
> > running engine. I seem
> > t
>
> ---------------------------------------------------------------------
> Web mail provided by NuNet, Inc. The Premier National provider.
> http://www.nni.com/
>
>
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://www.diy-efi.org/mailman/listinfo/diy_efi
>


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi