[Diy_efi] need some help with honda ecu.

Shannen Durphey shannen at grolen.com
Tue Jul 9 02:34:50 GMT 2002


Lotsa options, not all good, and not all are inexpensive DIY stuff.

Piggyback units, external controllers, Hondata, aftermarket ecu's are all
available for cams/intake/forced induction/nitrous/whatever changes.  To
some extent, BTDT.

Lotsa work in what you're doing, but it sounds like you're used to that. 
The GM unit might be made to work easier than you think, at least for the
NA cars.  Still, it'd be nice to have the power to make changes in the
factory controller.

Watch the language, it's a family channel. ; )

Get some .bins posted.  There's a lot of "grey matter" that can be applied
to figuring those things out.  Especially when some of these guys realize
that Honda builds a good ecu.

Shannen



Djfreggens at aol.com wrote:
> 
> bruce i could actually do this but i would need to completely trash the stock
> ignition system and go back to a carb distributor. the idea here is to help
> the 3 g accord communitty get ahold of there ecm's and allow for bigger cams
> and such. im sure a 747 could be made to work. but the system is already
> sequential and the distributor is out to lunch ?? not sure how to get ahold
> of that bastard just yet. still trying to decipher the code for 8051 intel
> proccesors. im learning on a very very steep curve. im a carb guy trying to
> learn and i love these cars. the only hold back has been hacking this ecu to
> date. for a turbo or anything else stand alone has been the communitys only
> option. so i siad f--k it its time to figure this thing out. now im doing
> what i always do. diving in head first and swimming in s--t for a while till
> i get it figured out. i was just hopping someone here had some exprience that
> might help. thats not the case but thats OK. im still learning all kinds of
> things and i am really getting a grip on the gm ecms. which i like to use on
> lots of vehicles. before i was at the mercy of a programmer now i am able to
> do things more and more on my own.
> thanx for all the help !!!!!!!! i apprciate it. i will get some bins up soon.
> maybe then you guys can pitch in ??? thanx again !!
> 
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://www.diy-efi.org/mailman/listinfo/diy_efi

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi



More information about the Diy_efi mailing list