[Diy_efi] Spark Plug readings

[Brian Renegar]

>Absolutely. Drag the significant other out for you WOT
>runs. "Ok, hold this voltememter in your lap. If it
>drops below 0.75 volts shout 'lean'". Watch the
>exhaust. If it's black, shout 'rich'" As i shift, watch
>the boost gauge. Take note of peak boost for each gear
>and at what rpm it occurred in each gear. Watch for
>boost spikes and taper. Oh and put these headphones on,
>they're clipped to the head so you can listen for any
>pinging. Thanks hon". Lol. Can't you just see the
>confused, sour look on her face? ahahaha. But yeah
>assistants are good.

HAHA!!  Yeah, I'd love to see her try and remember all of that!  She would 
probably be too busy taking care of the KIDS though.  :-)  I don't really 
like strapping them in when I'm going to be doing some *testing*.  :)


>8.7:1 and 9psi on 93 ought to be fine assuming decent
>mixtures and no drastic changes to squish height or
>quench area assuming you have an IC. Could be
>borderline non-intercooled though.

Yes, it is intercooled.  Shouldn't be any problems there.

Brian


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi