[Diy_efi] sequential injection timing

[Bruce]

----- Original Message -----
From: "Greg Hermann" <bearbvd at mindspring.com>
Subject: Re: [Diy_efi] sequential injection timing
> At 4:28 PM 7/30/95, Bruce wrote:
> >Interestingly enough over the weekend I was reading the engine sheets
from
> >Cosworth on an engine a guy bought.   In the dyno sheets it gave the
Weber
> >jet sizes, but no emulsion tube numbers.
> >Bruce

> Bet no choke sizes or auxiliary venturi areas, either ?? :-)

In the general carb specs they did, they also called for a 48DCO, calling it
an updated 45 DCOE.
I don't have the doc., but now that I think about it, they left out the
float stuff.
They did call for an Emerald ECU for operating it in EFI form.
Electromotive DIS.
Bruce


> Greg (step right up, folks, we got plenty more!)



_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi