[Diy_efi] sequential injection timing

[Bruce]

Hmm, was a new number for me too, is why I mentioned it.
Bruce


----- Original Message -----
From: "Greg Hermann" <bearbvd at mindspring.com>
Subject: Re: [Diy_efi] sequential injection timing
> >In the general carb specs they did, they also called for a 48DCO, calling
it
> >an updated 45 DCOE.
> I've heard of 48 DCOE's and 58 DCO3's, but never a 48 DCO. The 58 DCO3 is
> damn near unobtanium, it's the old sand cast design. (had to be sand cast,
> the "fuel" resistant alloy used in 'em is not amenable to die casting!)
> Greg
> >I don't have the doc., but now that I think about it, they left out the
> >float stuff.
> >They did call for an Emerald ECU for operating it in EFI form.
> >Electromotive DIS.
> >Bruce


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi