[Diy_efi] sequential injection timing

[bill.shurvinton at nokia.com]

Probably a 48 DCO-SP, which was a later version. Slightly modified =
progression drillings and a few other mods (missing idle air bypass I =
think)

Bill

-----Original Message-----
From: ext Greg Hermann [mailto:bearbvd at mindspring.com]
Sent: 31 July 2002 02:02
To: diy_efi at diy-efi.org
Subject: Re: [Diy_efi] sequential injection timing



>In the general carb specs they did, they also called for a 48DCO, =
calling it
>an updated 45 DCOE.

I've heard of 48 DCOE's and 58 DCO3's, but never a 48 DCO. The 58 DCO3 =
is
damn near unobtanium, it's the old sand cast design. (had to be sand =
cast,
the "fuel" resistant alloy used in 'em is not amenable to die casting!)

Greg

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi