RS232 IR Gas Analyser.

The Punisher punisher454 at hotmail.com
Fri Mar 22 08:21:02 GMT 2002


You could post that PDF in the incoming, at the diy-efi site.
If it already has an rs232 output then it must already do alot of the work 
for you as far as sensor driving/reading and possibly interpolation. It 
sounds like it would be very simple to make a uC powered display with it.
For $750 I am assuming that is for the sensor and rs232 interface, can you 
purchase the sensor alone?
Also, since this would be in the exhause system what happens whn the windows 
that the IR emitter and reciever get a coating of soot on them? or am I 
missing something here ?

Marvin Fugate



From: "Daniel O'Connell" <electric at esatclear.ie>
>Reply-To: diy_efi at diy-efi.org
>To: <diy_efi at diy-efi.org>
>Subject: RS232 IR Gas Analyser.
>Date: Wed, 13 Mar 2002 20:15:18 -0000
>
>Hi Folks I hope this is within topic.
>I been doing some research on building a homemade CO/HC gas analyser and
>contacted some firms making sensors.I came across a firm in England making 
>a
>completely integrated 4 / 5 gas , analyser for about £500-($ 750-00) .It is
>infrared for HC, CO & CO2 and fuel cell for O2 and NOx.The price is right
>and the extra hardware involved is minimal. BUT I need to write my own
>software to communicate with it !!
>  Question. I have the manufacturers parameter manual with all the software
>specs but need some good advice .
>It is about 1.5MB and in PDF format .
>If anyone would care to have a look and give me their advice I will forward
>it to them .
>Many Thanks
>Dan O'Connell
>Cork Ireland
>
>----- End of forwarded message from owner-diy_efi at diy-efi.org -----
>----------------------------------------------------------------------------
>To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the 
>quotes)
>in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>




_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org



More information about the Diy_efi mailing list