RS232 IR Gas Analyser.

[huw scourfield]

I'd like a look at this Dan,
 Thanks,
        Huw
----- Original Message -----
From: "Daniel O'Connell" <electric at esatclear.ie>
To: <diy_efi at diy-efi.org>
Sent: Wednesday, March 13, 2002 8:15 PM
Subject: RS232 IR Gas Analyser.


> Hi Folks I hope this is within topic.
> I been doing some research on building a homemade CO/HC gas analyser and
> contacted some firms making sensors.I came across a firm in England making
a
> completely integrated 4 / 5 gas , analyser for about £500-($ 750-00) .It
is
> infrared for HC, CO & CO2 and fuel cell for O2 and NOx.The price is right
> and the extra hardware involved is minimal. BUT I need to write my own
> software to communicate with it !!
>  Question. I have the manufacturers parameter manual with all the software
> specs but need some good advice .
> It is about 1.5MB and in PDF format .
> If anyone would care to have a look and give me their advice I will
forward
> it to them .
> Many Thanks
> Dan O'Connell
> Cork Ireland
>
> ----- End of forwarded message from owner-diy_efi at diy-efi.org -----
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org