Oxygen sensors...
Bruce
nacelp at bright.net
Thu Mar 28 08:58:00 GMT 2002
yes, there are volumes in the archives,
even some info at www.diy-wb.com
Bruce
----- Original Message -----
From: "EFI Dude" <efidude at avn-tech.com>
To: <diy_efi at diy-efi.org>
Sent: Friday, March 22, 2002 1:28 PM
Subject: Oxygen sensors...
> Hi,
>
> I am trying to find information on the various types of oxygen sensors
> that are available, but haven't found much (so far) in the archives,
though
> I'm sure that this discussion must've been beaten to death on this list.
Is
> there a quick link to a site that can give me some good info? I'm still
> searching the archives though.
>
> Initially, I'd like to know what output signal I can expect from my
existing
> O2 sensors (1990 Mustang 5.0). I know that it will be pulsed, but
> it that by design? Or is it due to the firing of the cylinders? By that
I
> mean that if I placed the sensor in an enclosed container that has
> a gas with a certain a/f ratio, will I see a fixed output, or a pulsing
> output?
>
> I'm also trying to find info on the different types of aftermarket
wide-band
> sensors. I've spoken with NTK who says that their wide bands are
> continuous voltage output with their controller boxes, but won't give me
> info on the O2 sensor outputs by themselves.
>
> I also heard that the Honda Insight (and possibly a Civic model) uses
> a wide-band sensor, but I haven't yet found out the specs on these.
>
> Thanks,
> -Neil.
>
>
>
>
>
> ----- End of forwarded message from owner-diy_efi at diy-efi.org -----
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org
More information about the Diy_efi
mailing list