[Diy_efi] : Ask the experts #2

[William Shurvinton]

Hi Bruce,

Thanks for that. But, in the case where you can't put a large plenum above
the V can you place it behind the engine and still get a workable solution.?
There is really not much room in this install above the height of the rocker
covers which limits the options. I left the friend looking at a cross-fire
design where the runners scoot over the top of the rockers into plenums on
the side (lots of room there). Still 2 plenums, but you could go to 1 TB
from there.

There are times where straight configs are a lot easier

Bill
----- Original Message -----
From: Bruce <nacelp at bright.net>
To: <Diy_efi at diy-efi.org>
Sent: Friday, May 17, 1996 7:47 PM
Subject: Re: [Diy_efi] : Ask the experts #2



Let's just look at things,
the best manifolding I know of is Independent Runners.

Do the best you can with the runners.
Large Plenum.
Large single butterfly,
and have fun.




_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi