May 2002 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Wed May 1 03:00:56 GMT 2002
Ending: Fri May 31 23:55:39 GMT 2002
Messages: 604

• [Diy_efi] lean switching sensors?   944Technologist
• [Diy_efi] Motronic ML4.1 disassembly ..   944Technologist
• [Diy_efi] Motronic ML4.1 disassembly ..   944Technologist
• [Diy_efi] BOSCH Uni-Tester   944Technologist
• [Diy_efi] "Wet" Manifold Questions   Stephen Andersen
• [Diy_efi] "Wet" Manifold Questions   Stephen Andersen
• [Diy_efi] "Wet" Manifold Questions   Stephen Andersen
• [Diy_efi] "Wet" Manifold Questions   Stephen Andersen
• [Diy_efi] "Wet" Manifold Questions   Stephen Andersen
• [Diy_efi] "Wet" Manifold Questions   Stephen Andersen
• [Diy_efi] "Wet" Manifold Questions   Stephen Andersen
• [Diy_efi] Stupid Petty Bickering   Stephen Andersen
• [Diy_efi] Greetings...and Throttle Bodies   Bob Anderson
• [Diy_efi] Greetings...and Throttle Bodies   Bob Anderson
• [Diy_efi] Small Oxygen Sensors? (Newbie's first post)   Jamie Aycock
• [Diy_efi] '82-'83 Cross-Fire Dual TBI Manifold   Elliott Bailiff
• [Diy_efi] L Jetronic Question   Alan Barrow
• [Diy_efi] Searching the achives   Grant Beaty
• [Diy_efi] I must be asking lame questions.   Grant Beaty
• [Diy_efi] Re: Searching the achives   Grant Beaty
• [Diy_efi] I must be asking lame questions.   Grant Beaty
• Fw: [Diy_efi] compression ratio   Grant Beaty
• Fw: [Diy_efi] compression ratio   Grant Beaty
• [Diy_efi] Delphi alcohol injectors   Grant Beaty
• [Diy_efi] wb parts kits (was WBO2 LED display)   Chad Beebe
• [Diy_efi] Knock Detection using GM ESC Module   Jeremy Bertenshaw
• [Diy_efi] I must be asking lame questions.   Reid Bishop
• [Diy_efi] I must be asking lame questions.   Raymond Brantley
• [Diy_efi] I must be asking lame questions.   Raymond Brantley
• [Diy_efi] Combustion chamber question   Raymond Brantley
• [Diy_efi] FJO DFI systems   Raymond Brantley
• [Diy_efi] [diy_efi]Marelli computer   Mike R Brown
• [Diy_efi] "reading" a turbo (as you might read plugs"   Bruce
• [Diy_efi] Re: [Diy_efi]   Bruce
• [Diy_efi] Re: [Diy_efi]   Bruce
• [Diy_efi] Re: [Diy_efi]   Bruce
• [Diy_efi] Re: [Diy_efi]   Bruce
• [Diy_efi] Re: [Diy_efi]   Bruce
• [Diy_efi] Re: [Diy_efi]   Bruce
• [Diy_efi] Re: [Diy_efi]   Bruce
• [Diy_efi] Newbie   Bruce
• [Diy_efi] I must be asking lame questions.   Bruce
• [Diy_efi] I must be asking lame questions.   Bruce
• [Diy_efi] I must be asking lame questions.   Bruce
• [Diy_efi] I must be asking lame questions.   Bruce
• [Diy_efi] I must be asking lame questions.   Bruce
• [Diy_efi] I must be asking lame questions.   Bruce
• [Diy_efi] I must be asking lame questions.   Bruce
• [Diy_efi] I must be asking lame questions. Now a correction to a posting   Bruce
• [Diy_efi] Steve Ciciora and WB parts????????   Bruce
• [Diy_efi] I must be asking lame questions. Now a correction to a posting   Bruce
• [Diy_efi] I must be asking lame questions. Now a correction to a posting Now an explaination to a correction   Bruce
• [Diy_efi] I must be asking lame questions.   Bruce
• [Diy_efi] compression ratio   Bruce
• [Diy_efi] I must be asking lame questions.   Bruce
• Fw: [Diy_efi] compression ratio   Bruce
• Fw: [Diy_efi] compression ratio   Bruce
• Fw: [Diy_efi] compression ratio   Bruce
• Fw: [Diy_efi] compression ratio   Bruce
• Fw: [Diy_efi] compression ratio   Bruce
• Fw: [Diy_efi] compression ratio   Bruce
• [Diy_efi] compression ratio   Bruce
• [Diy_efi] Combustion chamber question   Bruce
• Fw: [Diy_efi] compression ratio   Bruce
• Fw: [Diy_efi] compression ratio   Bruce
• [Diy_efi] Greetings...and Throttle Bodies   Bruce
• [Diy_efi] : tuned port manifolds   Bruce
• [Diy_efi] : tuned port manifolds   Bruce
• [Diy_efi] : tuned port manifolds   Bruce
• [Diy_efi] "Wet" Manifold Questions   Bruce
• [Diy_efi] "Wet" Manifold Questions   Bruce
• [Diy_efi] Re: "Wet" Manifold Questions   Bruce
• [Diy_efi] : ask the clowns at CSH, HQexperts #1   Bruce
• [Diy_efi] : Ask the experts #2   Bruce
• [Diy_efi] : Ask the experts #2   Bruce
• IR throttle bore sizing (Re: [Diy_efi] : Ask the experts #2)   Bruce
• [Diy_efi] Noisy Votecs   Bruce
• [Diy_efi] Greetings...and Throttle Bodies   Bruce
• [Diy_efi] GM EFI on Aircooled 2L engine   Bruce
• [Diy_efi] fuel injection for an airplane engine   Bruce
• [Diy_efi] fuel injection for an airplane engine   Bruce
• [Diy_efi] : returnless fuel rails   Bruce
• [Diy_efi] GM EFI on Aircooled 2L engine   Bruce
• [Diy_efi] fuel injection for an airplane engine   Bruce
• [Diy_efi] fuel injection for an airplane engine   Bruce
• [Diy_efi] fuel injection for an airplane engine   Bruce
• [Diy_efi] fuel injection for an airplane engine   Bruce
• [Diy_efi] fuel injection for an airplane engine   Bruce
• [Diy_efi] Knock Detection using GM ESC Module   Bruce
• [Diy_efi] Knock Detection using GM ESC Module   Bruce
• [Diy_efi] Knock Detection using GM ESC Module   Bruce
• [Diy_efi] Knock Detection using GM ESC Module   Bruce
• [Diy_efi] Knock Detection using GM ESC Module   Bruce
• [Diy_efi] WB free air calibration   Bruce
• [Diy_efi] Knock Detection using GM ESC Module   Bruce
• [Diy_efi] Knock Detection using GM ESC Module   Bruce
• [Diy_efi] Knock Detection by J+S   Bruce
• [Diy_efi] Knock Detection using GM ESC Module   Bruce
• [Diy_efi] Knock Detection using GM ESC Module   Bruce
• [Diy_efi] Motronic ML4.1 disassembly ..   Dave Brul
• [Diy_efi] Motronic ML4.1 disassembly ..   Dave Brul
• [Diy_efi] Motronic ML4.1 disassembly ..   Dave Brul
• [Diy_efi] Motronic ML4.1 disassembly ..   Dave Brul
• [Diy_efi] Motronic ML4.1 disassembly ..   Dave Brul
• [Diy_efi] Motronic ML4.1 disassembly ..   Dave Brul
• [Diy_efi] "reading" a turbo (as you might read plugs"   Jeroen Cats
• [Diy_efi] injector flow rates   Tom Cheung
• [Diy_efi] MC33385   Jacky Chu
• [Diy_efi] Connector for the DIY-WB Project   AJ Clayton
• [Diy_efi] Connector for the DIY-WB Project   AJ Clayton
• [Diy_efi] DIY-WB / unplugged sensors   Chad Clendening
• [Diy_efi] Re: "Wet" Manifold Questions   Chris Conlon
• [Diy_efi] "reading" a turbo (as you might read plugs"   J. Creech
• [Diy_efi] Diy-WB Info   J. Creech
• [Diy_efi] vortec engine piston noise?   J. Creech
• [Diy_efi] Searspoint Podium Pix...   Doug Dayson
• [Diy_efi] Re: [Gmecm] finally...   Doug Dayson
• [Diy_efi] vortec engine piston noise?   Eric Deslauriers
• [Diy_efi] "reading" a turbo (as you might read plugs"   Brian Dessent
• [Diy_efi] unknow injectors   Brian Dessent
• [Diy_efi] "reading" a turbo (as you might read plugs"   Brian Dessent
• [Diy_efi] PC ECU?   Brian Dessent
• [Diy_efi] Howdy w/ questions.   Brian Dessent
• [Diy_efi] I must be asking lame questions.   Brian Dessent
• [Diy_efi] Turbo on a 292 inline   Brian Dessent
• [Diy_efi] I must be asking lame questions.   Brian Dessent
• [Diy_efi] injector flow rates   Brian Dessent
• [Diy_efi] I must be asking lame questions.   Mike Diehl
• [Diy_efi] I must be asking lame questions.   Mike Diehl
• [Diy_efi] I must be asking lame questions.   Mike Diehl
• [Diy_efi] Hi All   Dot-n-Don
• [Diy_efi] WB free air calibration   Dot-n-Don
• [Diy_efi] : Ask the experts #2   Craig Dotson
• [Diy_efi] Replying to digest messages   Shannen Durphey
• [Diy_efi] diy-wb parts kits   Shannen Durphey
• [Diy_efi] I must be asking lame questions. Now a correction to   Shannen Durphey
• [Diy_efi] Howdy with questions   Shannen Durphey
• [Diy_efi] : tuned port manifolds   Shannen Durphey
• [Diy_efi] engine bay bulkhead connectors & color coded wires   Shannen Durphey
• [Diy_efi] Turbocharging a 2.3l was "Wet" Manifold Questions   Shannen Durphey
• [Diy_efi] : ask the experts #1   Shannen Durphey
• [Diy_efi] vortec engine piston noise?   Shannen Durphey
• [Diy_efi] vortec engine piston noise?   Shannen Durphey
• [Diy_efi] vortec engine piston noise?   Shannen Durphey
• [Diy_efi] WB free air calibration   Shannen Durphey
• [Diy_efi] Re: GM Optical VSS   Shannen Durphey
• [Diy_efi] new .bin files at /incoming   Shannen Durphey
• [Diy_efi] Liquid Phase Propane Injectors   Mazda Ebrahimi
• [Diy_efi] : tuned port manifolds   Eck, Joel
• [Diy_efi] engine bay bulkhead connectors & color coded wires   Eck, Joel
• [Diy_efi] WB free air calibration   Rob F
• [Diy_efi] WB free air calibration   Rob F
• [Diy_efi] I must be asking lame questions.   Eric Fahlgren
• [Diy_efi] I must be asking lame questions.   Eric Fahlgren
• Fw: [Diy_efi] compression ratio   Eric Fahlgren
• [Diy_efi] : tuned port manifolds   Eric Fahlgren
• [Diy_efi] "Wet" Manifold Questions   Eric Fahlgren
• [Diy_efi] need help w/archives   Eric Fahlgren
• [Diy_efi] Small Oxygen Sensors? (Newbie's first post)   Eric Fahlgren
• [Diy_efi] fuel injection for an airplane engine   Eric Fahlgren
• [Diy_efi] fuel injection for an airplane engine   Eric Fahlgren
• [Diy_efi] Turbocharging a 2.3l was "Wet" Manifold Questions   Shawn Fogg
• [Diy_efi] Turbocharging a 2.3l was "Wet" Manifold Questions   Shawn Fogg
• [Diy_efi] Turbocharging a 2.3l was "Wet" Manifold Questions   Shawn Fogg
• [Diy_efi] Knock Detection using GM ESC Module   Dennis Gearon
• [Diy_efi] Instrumenting Engine Mounts   Dennis Gearon
• [Diy_efi] Bosh trigger wheels   Dennis Gearon
• [Diy_efi] PC Board for WB02 36 LED bar graph display   Wing Gee
• [Diy_efi] Porsche 964 boardcomputer   Marc Geyskens
• [Diy_efi] IAC control   Dan Griffin
• [Diy_efi] Re: GM Optical VSS   Dan Griffin
• [Diy_efi] Pro M MAF for GM Bosch MAF for sale on ebay   Jason Haines
• [Diy_efi] Knock Detection using GM ESC Module   Guy Hammer
• [Diy_efi] injector unions   Tom Hanauer
• [Diy_efi] lean switching sensors?   Perry Harrington
• [Diy_efi] I must be asking lame questions.   Perry Harrington
• [Diy_efi] compression ratio   Perry Harrington
• [Diy_efi] compression ratio   Perry Harrington
• [Diy_efi] Data logging..   Perry Harrington
• [Diy_efi] Data logging..   Perry Harrington
• [Diy_efi] Combustion chamber question   Perry Harrington
• [Diy_efi] Combustion chamber question   Perry Harrington
• [Diy_efi] Combustion chamber question   Perry Harrington
• [Diy_efi] "Wet" Manifold Questions   Perry Harrington
• [Diy_efi] vortec engine piston noise?   Perry Harrington
• [Diy_efi] : returnless fuel rails   Perry Harrington
• [Diy_efi] Combustion Temperature Sensor.   Robert Harris
• [Diy_efi] (no subject)   Robert Harris
• [Diy_efi] Liquid Phase Propane Injectors   Robert Harris
• [Diy_efi] Liquid Phase Propane Injectors   Robert Harris
• [Diy_efi] diy-wb parts kits   Jurgen Hartwig
• [Diy_efi] Re: diy-wb parts kits   Jurgen Hartwig
• [Diy_efi] diy-wb parts kits   Jurgen Hartwig
• [Diy_efi] Steve Ciciora and WB parts????????   Jurgen Hartwig
• [Diy_efi] Diy-WB Info   Jurgen Hartwig
• [Diy_efi] "Wet" Manifold Questions   Jurgen Hartwig
• [Diy_efi] wb parts kits (was WBO2 LED display)   Jurgen Hartwig
• [Diy_efi] wb parts kits (was WBO2 LED display)   Jurgen Hartwig
• [Diy_efi] New member // processor/disassembler questions   Stephan Helbig
• [Diy_efi] BMW DDE Sourcecode File   Stephan Helbig
• [Diy_efi] Re: ISO Interface for ISO -9141   Stephan Helbig
• [Diy_efi] Re:ISO Interface for ISO -9141   Stephan Helbig
• [Diy_efi] Newbie   Lyle Herbert
• [Diy_efi] diy-wb parts kits   Greg Hermann
• Fw: [Diy_efi] compression ratio   Greg Hermann
• Fw: [Diy_efi] compression ratio   Greg Hermann
• [Diy_efi] compression ratio   Greg Hermann
• Fw: [Diy_efi] compression ratio   Greg Hermann
• Fw: [Diy_efi] compression ratio   Greg Hermann
• [Diy_efi] compression ratio   Greg Hermann
• [Diy_efi] Combustion chamber question   Greg Hermann
• [Diy_efi] Combustion chamber question   Greg Hermann
• [Diy_efi] Combustion chamber question   Greg Hermann
• [Diy_efi] "Wet" Manifold Questions   Greg Hermann
• [Diy_efi] : returnless fuel rails   Greg Hermann
• [Diy_efi] (no subject)   Greg Hermann
• Fw: [Diy_efi] compression ratio   Rod Hiorns
• [Diy_efi] compression ratio   Robert W. Hughes
• [Diy_efi] NetPIC   Phil Hunter
• [Diy_efi] Re: "Wet" Manifold Questions   Phil Hunter
• [Diy_efi] Howdy w/ questions.   Steve Hutson
• [Diy_efi] Howdy with questions   Steve Hutson
• [Diy_efi] DIY-WB problems   Enzo Iadevaia
• [Diy_efi] IAC control   QQA Inc.
• [Diy_efi] "reading" a turbo (as you might read plugs"   Gorden Jennings
• Fw: [Diy_efi] compression ratio   Jorgen Karlsson
• [Diy_efi] Steve Ciciora and WB parts????????   Keith
• [Diy_efi] Diy-WB Info   Keith
• [Diy_efi] PC Board for WB02 36 LED bar graph display   Keith
• [Diy_efi] Re: [Diy_efi]   Kenny
• [Diy_efi] injector unions   Todd Kirkwood
• [Diy_efi] Steve Ciciora and WB parts????????   Kooser, Jacob
• [Diy_efi] : tuned port manifolds   Phil Lamovie
• [Diy_efi] On topic Aircraft EFI   Phil Lamovie
• [Diy_efi] Delphi alcohol injectors   Phil Lamovie
• [Diy_efi] Liquid Phase Propane Injectors   Phil Lamovie
• [Diy_efi] Liquid Phase Propane Injectors   Phil Lamovie
• [Diy_efi] Liquid Phase Propane Injectors   Phil Lamovie
• [Diy_efi] Liquid Phase Propane Injectors   Phil Lamovie
• [Diy_efi] Liquid Phase Propane Injectors   Phil Lamovie
• [Diy_efi] Liquid Phase Propane Injectors   Phil Lamovie
• [Diy_efi] Liquid Phase Propane Injectors   Phil Lamovie
• [Diy_efi] wich efi to chose   Bino Lardo
• [Diy_efi] fuel injection for an airplane engine   Bino Lardo
• [Diy_efi] (no subject)   Bino Lardo
• [Diy_efi] fuel injection for an airplane engine   Ron Larock
• [Diy_efi] Data logging..   Antti Lehtonen
• [Diy_efi] Data logging..   Antti Lehtonen
• [Diy_efi] Steve Ciciora and WB parts????????   Tom Leser
• [Diy_efi] compression ratio   Rich M
• [Diy_efi] injector unions   Rich M
• [Diy_efi] Small Oxygen Sensors? (Newbie's first post)   Rich M
• [Diy_efi] Small Oxygen Sensors? (Newbie's first post)   Rich M
• [Diy_efi] compression ratio   MWP
• [Diy_efi] PC ECU?   MWP
• [Diy_efi] PC ECU?   MWP
• [Diy_efi] PC ECU?   MWP
• [Diy_efi] PC ECU?   MWP
• Fw: [Diy_efi] compression ratio   Marteney, Steve
• [Diy_efi] vortec engine piston noise?   Matt
• [Diy_efi] Liquid Phase Propane Injectors   Chris McKinnon
• [Diy_efi] Liquid Phase Propane Injectors   Chris McKinnon
• [Diy_efi] [diy_efi]Marelli computer   McLeod, John
• [Diy_efi] "reading" a turbo (as you might read plugs"   Jeff Meager
• [Diy_efi] "reading" a turbo (as you might read plugs"   Jeff Meager
• [Diy_efi] fuel injection for an airplane engine   Erik Meisterman
• [Diy_efi] fuel injection for an airplane engine   Erik Meisterman
• [Diy_efi] fuel injection for an airplane engine   Erik Meisterman
• [Diy_efi] compression ratio   Menno
• [Diy_efi] vortec engine piston noise?   Paul Messinger
• [Diy_efi] fuel injection for an airplane engine   Brian Michalk
• [Diy_efi] fuel injection for an airplane engine   Brian Michalk
• [Diy_efi] On topic Aircraft EFI   Brian Michalk
• [Diy_efi] fuel injection for an airplane engine   04 Rob Olsen
• [Diy_efi] injector unions   Sean Olson
• [Diy_efi] need help w/archives   Sean Olson
• [Diy_efi] fuel injection for an airplane engine   Sean Olson
• [Diy_efi] help w/dyi-wb please   Gregory A. Parmer
• [Diy_efi] Combustion chamber question   Phil
• [Diy_efi] : tuned port manifolds   Phil
• [Diy_efi] : tuned port manifolds   Phil
• [Diy_efi] TBI and EFI computers   Dan Plaskett
• [Diy_efi] Howdy w/ questions.   Programmer
• [Diy_efi] vortec engine piston noise?   Programmer
• [Diy_efi] Knock Detection using GM ESC Module   Programmer
• [Diy_efi] Knock Detection using GM ESC Module   Programmer
• [Diy_efi] Knock Detection using GM ESC Module   Programmer
• [Diy_efi] new .bin files at /incoming   Programmer
• [Diy_efi] PC ECU?   ROBO5.8
• AW: [Diy_efi] Low compression pistons   Rausch, Bernd
• [Diy_efi] Re: [Diy_efi]   Brian Renegar
• [Diy_efi] Re: [Diy_efi]   Brian Renegar
• [Diy_efi] Re: [Diy_efi]   Brian Renegar
• [Diy_efi] Knock Detection using GM ESC Module   Ken Richardson
• [Diy_efi] Knock Detection using GM ESC Module   Ken Richardson
• [Diy_efi] Knock Detection using GM ESC Module   Ken Richardson
• [Diy_efi] Knock Detection using GM ESC Module   Ken Richardson
• [Diy_efi] compression ratio   Axel Rietschin
• Fw: [Diy_efi] compression ratio   Axel Rietschin
• Fw: [Diy_efi] compression ratio   Axel Rietschin
• Fw: [Diy_efi] compression ratio   Axel Rietschin
• [Diy_efi] GM EFI on Aircooled 2L engine   Bobby Riggs
• [Diy_efi] GM EFI on Aircooled 2L engine   Bobby Riggs
• [Diy_efi] fuel injection for an airplane engine   Bobby Riggs
• [Diy_efi] GM EFI on Aircooled 2L engine   Bobby Riggs
• [Diy_efi] fuel injection for an airplane engine   Bobby Riggs
• [Diy_efi] fuel injection for an airplane engine   Bobby Riggs
• [Diy_efi] Knock Detection using GM ESC Module   Bobby Riggs
• [Diy_efi] "Wet" Manifold Questions   Mark S. Riley
• [Diy_efi] Turbocharging a 2.3l was "Wet" Manifold Questions   Mark S. Riley
• [Diy_efi] Haltech E6K   Robert
• [Diy_efi] Re: DIY_EFI Digest V6 #92   Arty Ross
• [Diy_efi] Injector Info   Bill Ross
• [Diy_efi] : tuned port manifolds   Jesse Ruppel
• [Diy_efi] : tuned port manifolds   Jesse Ruppel
• [Diy_efi] : tuned port manifolds   Jesse Ruppel
• [Diy_efi] : tuned port manifolds   Jesse Ruppel
• [Diy_efi] unknow injectors   Denis S
• [Diy_efi] AMC 258 to GM TBI conversion   George Sapak
• [Diy_efi] PC ECU?   Tomas Sokorai Sch.
• [Diy_efi] Hall-effect sensor for crankshaft question   Tomas Sokorai Sch.
• [Diy_efi] fuel injection for an airplane engine   Tomas Sokorai Sch.
• [Diy_efi] MAP sensor pinout   Tomas Sokorai Sch.
• [Diy_efi] Liquid Phase Propane Injectors   Ron Schroeder
• [Diy_efi] compression ratio   Tom Sharpe
• Fw: [Diy_efi] compression ratio   Tom Sharpe
• Fw: [Diy_efi] compression ratio   Tom Sharpe
• [Diy_efi] "Wet" Manifold Questions   Tom Sharpe
• [Diy_efi] "Wet" Manifold Questions   Tom Sharpe
• [Diy_efi] : ask the experts #1   Tom Sharpe
• [Diy_efi] : ask the experts #1   Tom Sharpe
• [Diy_efi] [diy_efi]Marelli computer   Tom Sharpe
• [Diy_efi] finally...   Tom Sharpe
• [Diy_efi] vortec engine piston noise?   Tom Sharpe
• [Diy_efi] vortec engine piston noise?   Tom Sharpe
• [Diy_efi] vortec engine piston noise?   Tom Sharpe
• [Diy_efi] Howdy w/ questions.   Shirley, Mark R
• [Diy_efi] : tuned port manifolds   Shirley, Mark R
• [Diy_efi] "reading" a turbo (as you might read plugs"   William Shurvinton
• [Diy_efi] Gmecm list   William Shurvinton
• [Diy_efi] PC ECU?   William Shurvinton
• [Diy_efi] Re: [Diy_efi]   William Shurvinton
• [Diy_efi] Re: [Diy_efi]   William Shurvinton
• Fw: [Diy_efi] compression ratio   William Shurvinton
• Fw: [Diy_efi] compression ratio   William Shurvinton
• Fw: [Diy_efi] compression ratio   William Shurvinton
• Fw: [Diy_efi] compression ratio: now WI   William Shurvinton
• Fw: [Diy_efi] compression ratio: now WI   William Shurvinton
• [Diy_efi] : tuned port manifolds   William Shurvinton
• [Diy_efi] Combustion chamber question   William Shurvinton
• [Diy_efi] injector unions   William Shurvinton
• Fw: [Diy_efi] compression ratio   William Shurvinton
• [Diy_efi] : tuned port manifolds   William Shurvinton
• [Diy_efi] : Ask the experts #2   William Shurvinton
• [Diy_efi] : ask the experts #1   William Shurvinton
• [Diy_efi] : Ask the experts #2   William Shurvinton
• [Diy_efi] Connector for the DIY-WB Project   William Shurvinton
• [Diy_efi] WB02 not passing tests completely   William Shurvinton
• [Diy_efi] : returnless fuel rails   William Shurvinton
• [Diy_efi] vortec engine piston noise?   William Shurvinton
• [Diy_efi] : returnless fuel rails   William Shurvinton
• [Diy_efi] fuel injection for an airplane engine   William Shurvinton
• [Diy_efi] fuel injection for an airplane engine   William Shurvinton
• [Diy_efi] fuel injection for an airplane engine   William Shurvinton
• [Diy_efi] fuel injection for an airplane engine   William Shurvinton
• [Diy_efi] Liquid Phase Propane Injectors   William Shurvinton
• [Diy_efi] TBI and EFI computers   William Shurvinton
• [Diy_efi] Liquid Phase Propane Injectors   William Shurvinton
• [Diy_efi] Knock Detection using GM ESC Module   William Shurvinton
• [Diy_efi] fuel injection for an airplane engine   William Shurvinton
• [Diy_efi] Knock Detection using GM ESC Module   William Shurvinton
• [Diy_efi] Liquid Phase Propane Injectors   William Shurvinton
• [Diy_efi] : tuned port manifolds   Andris Skulte
• [Diy_efi] engine bay bulkhead connectors & color coded wires   Andris Skulte
• [Diy_efi] Megasquirt   Steve Spiers
• [Diy_efi] Low compression pistons   Steve Spiers
• [Diy_efi] Re: diy-wb parts kits   Robert A. Ward Sr.
• [Diy_efi] (no subject)   Deep Stroke
• [Diy_efi] (no subject)   Deep Stroke
• [Diy_efi] (no subject)   Deep Stroke
• [Diy_efi] (no subject)   Deep Stroke
• [Diy_efi] WB free air calibration   Deep Stroke
• [Diy_efi] DIY WB Parts Question   Nate Stuart
• [Diy_efi] Positioning of O2 sensor?   Sven
• [Diy_efi] Ways to effectively use O2 sensor on motorcycle?   Sven
• [Diy_efi] RE: Ways to effectively use O2 sensor on motorcycle?   Sven
• Fw: [Diy_efi] compression ratio   TVS
• [Diy_efi] Point of fuel injection   TVS
• [Diy_efi] compression ratio   TVS
• [Diy_efi] Point of fuel injection   TVS
• [Diy_efi] Point of fuel injection   TVS
• IR throttle bore sizing (Re: [Diy_efi] : Ask the experts #2)   TVS
• IR throttle bore sizing (Re: [Diy_efi] : Ask the experts #2)   TVS
• [Diy_efi] vortec engine piston noise?   Andrew Theurer
• [Diy_efi] Knock Detection using GM ESC Module   Barry Tisdale
• [Diy_efi] 2.8 liter V6 in '88 jimmy   Todd
• [Diy_efi] Re: [Diy_efi]   Todd
• [Diy_efi] Re: [Diy_efi]   Todd
• [Diy_efi] Re: [Diy_efi]   Todd
• [Diy_efi] Turbo on a 292 inline   Todd
• [Diy_efi] vortec engine piston noise?   Todd
• [Diy_efi] vortec engine piston noise?   Todd
• [Diy_efi] TBI and EFI computers   Todd
• [Diy_efi] Motronic 7.1 disassembly   Andy Whittaker - Chester UK
• [Diy_efi] Gmecm list   Jon V
• [Diy_efi] I must be asking lame questions.   Jon V
• [Diy_efi] a test (really a test) -- ignore   Jon V
• [Diy_efi] a test (really a test) -- ignore   Jon V
• [Diy_efi] "Wet" Manifold Questions   Kenny W
• [Diy_efi] "Wet" Manifold Questions   Kenny W
• [Diy_efi] "Wet" Manifold Questions   Kenny W
• [Diy_efi] "Wet" Manifold Questions   Kenny W
• [Diy_efi] Turbocharging a 2.3l was "Wet" Manifold Questions   Kenny W
• [Diy_efi] Turbocharging a 2.3l was "Wet" Manifold Questions   Kenny W
• [Diy_efi] Turbocharging a 2.3l was "Wet" Manifold Questions   Kenny W
• [Diy_efi] Turbocharging a 2.3l was "Wet" Manifold Questions   Kenny W
• [Diy_efi] "reading" a turbo (as you might read plugs"   Stephen Webb
• [Diy_efi] "reading" a turbo (as you might read plugs"   Stephen Webb
• [Diy_efi] "reading" a turbo (as you might read plugs"   Stephen Webb
• [Diy_efi] PC ECU?   Bevan Weiss
• [Diy_efi] I must be asking lame questions. Now a correction to a posting   Bevan Weiss
• [Diy_efi] compression ratio   Dave Williams
• Fw: [Diy_efi] compression ratio   Dave Williams
• [Diy_efi] : tuned port manifolds   Dave Williams
• [Diy_efi] Re: "Wet" Manifold Questions   Dave Williams
• Fw: [Diy_efi] compression ratio   Mark Williams
• [Diy_efi] Archive problems.   Mark Williams
• [Diy_efi] WB free air calibration   Mark Williams
• [Diy_efi] fuel injection for an airplane engine   Garfield Willis
• [Diy_efi] fuel injection for an airplane engine   Garfield Willis
• [Diy_efi] fuel injection for an airplane engine   Garfield Willis
• [Diy_efi] fuel injection for an airplane engine   Garfield Willis
• [Diy_efi] (no subject)   Garfield Willis
• [Diy_efi] (no subject)   Garfield Willis
• [Diy_efi] (no subject)   Garfield Willis
• [Diy_efi] (no subject)   Garfield Willis
• [Diy_efi] (no subject)   Garfield Willis
• [Diy_efi] (no subject)   Garfield Willis
• [Diy_efi] fuel injection for an airplane engine   Garfield Willis
• [Diy_efi] Knock Detection using GM ESC Module   Garfield Willis
• [Diy_efi] Knock Detection using GM ESC Module   Garfield Willis
• [Diy_efi] fuel injection for an airplane engine   Garfield Willis
• [Diy_efi] WB free air calibration   Garfield Willis
• [Diy_efi] WB free air calibration   Garfield Willis
• [Diy_efi] WB free air calibration   Garfield Willis
• [Diy_efi] Re: GM Optical VSS   W.J. Wilson
• [Diy_efi] Motronic ML4.1 disassembly ..   Steve Wong
• [Diy_efi] Motronic ML4.1 disassembly ..   Steve Wong
• [Diy_efi] Motronic ML4.1 disassembly ..   Steve Wong
• [Diy_efi] IAC control   socrace at ameritech.net
• [Diy_efi] PC Board for WB02 36 LED bar graph display   A79coupe at aol.com
• [Diy_efi] GM EFI on Aircooled 2L engine   ECMnut at aol.com
• [Diy_efi] vortec engine piston noise?   Ruffruff8888 at aol.com
• [Diy_efi] Combustion chamber question   Tlsalt at aol.com
• [Diy_efi] Combustion chamber question   Tlsalt at aol.com
• [Diy_efi] Re: [jyturbo] TBI setup   Turboshortbus at aol.com
• [Diy_efi] I must be asking lame questions.   WEG1192 at aol.com
• [Diy_efi] I must be asking lame questions.   WEG1192 at aol.com
• [Diy_efi] I must be asking lame questions.   WEG1192 at aol.com
• [Diy_efi] I must be asking lame questions. Now a correction to a posting   WEG1192 at aol.com
• [Diy_efi] I must be asking lame questions.   WEG1192 at aol.com
• [Diy_efi] I must be asking lame questions.   WEG1192 at aol.com
• [Diy_efi] I must be asking lame questions. Now a correction to a posting   WEG1192 at aol.com
• [Diy_efi] I must be asking lame questions. Now a correction to a posting   WEG1192 at aol.com
• [Diy_efi] Steve Ciciora and WB parts????????   WaynejohnsonOO7 at aol.com
• [Diy_efi] vortec engine piston noise?   arnie
• [Diy_efi] Low compression pistons   andy borris
• [Diy_efi] : tuned port manifolds   ruppeljw at capital.net
• [Diy_efi] help w/dyi-wb please   JMSMAUTOMOTIVE at cs.com
• [Diy_efi] help w/dyi-wb please   JMSMAUTOMOTIVE at cs.com
• [Diy_efi] Combustion chamber question   JMSMAUTOMOTIVE at cs.com
• [Diy_efi] RE:Low compression pistons   abnengineering at cs.com
• [Diy_efi] compression ratio   efi_student
• [Diy_efi] I must be asking lame questions. Now a correction to a   efi_student
• [Diy_efi] compression ratio   efi_student
• [Diy_efi] compression ratio   elcamino73
• [Diy_efi] compression ratio   elcamino73
• [Diy_efi] compression ratio   elcamino73
• Fw: [Diy_efi] compression ratio   elcamino73
• Fw: [Diy_efi] compression ratio   elcamino73
• Fw: [Diy_efi] compression ratio   elcamino73
• [Diy_efi] Low compression pistons   elcamino73
• Fw: [Diy_efi] compression ratio   elcamino73
• Fw: [Diy_efi] compression ratio   elcamino73
• Fw: [Diy_efi] compression ratio   elcamino73
• [Diy_efi] compression ratio   elcamino73
• Fw: [Diy_efi] compression ratio   elcamino73
• Fw: [Diy_efi] compression ratio   elcamino73
• [Diy_efi] compression ratio   elcamino73
• [Diy_efi] compression ratio   elcamino73
• [Diy_efi] compression ratio   elcamino73
• [Diy_efi] Anybody got spare WBO2 connectors?   rob files
• [Diy_efi] WB02 not passing tests completely   rob files
• [Diy_efi] WB02 not passing tests completely   rob files
• [Diy_efi] WB02 not passing tests completely   rob files
• [Diy_efi] WB02 not passing tests completely   rob files
• [Diy_efi] WB free air calibration   rob files
• [Diy_efi] WB free air calibration   rob files
• [Diy_efi] (no subject)   gazza836
• [Diy_efi] I must be asking lame questions.   dave.johnson at gb.abb.com
• [Diy_efi] fuel injection for an airplane engine   george00
• [Diy_efi] : returnless fuel rails   Shannen at grolen.com
• [Diy_efi] GM EFI on Aircooled 2L engine   Shannen at grolen.com
• [Diy_efi] IAC control   Shannen at grolen.com
• [Diy_efi] : returnless fuel rails   Shannen at grolen.com
• [Diy_efi] : I6 turbo manifold   justin ivan
• [Diy_efi] "Wet" Manifold Questions   justin ivan
• [Diy_efi] "Wet" Manifold Questions   justin ivan
• [Diy_efi] "Wet" Manifold Questions   justin ivan
• [Diy_efi] "Wet" Manifold Questions   justin ivan
• [Diy_efi] "Wet" Manifold Questions   justin ivan
• [Diy_efi] "Wet" Manifold Questions   justin ivan
• [Diy_efi] "Wet" Manifold Questions   justin ivan
• [Diy_efi] "reading" a turbo (as you might read plugs"   john
• [Diy_efi] "reading" a turbo (as you might read plugs"   john
• [Diy_efi] Haltech E6K   john
• [Diy_efi] Traction control strategy   bcroe at juno.com
• [Diy_efi] help w/dyi-wb please   bcroe at juno.com
• [Diy_efi] Connector for the DIY-WB Project   bcroe at juno.com
• [Diy_efi] "Wet" Manifold Questions   bcroe at juno.com
• [Diy_efi] PC Board for WB02 36 LED bar graph display   bcroe at juno.com
• [Diy_efi] Another parts correction WB 23 May LED Display   bcroe at juno.com
• [Diy_efi] returnless fuel rails   bcroe at juno.com
• [Diy_efi] DIY WB Parts Question   bcroe at juno.com
• [Diy_efi] WB free air calibration   bcroe at juno.com
• [Diy_efi] Knock Detection by J+S   bcroe at juno.com
• [Diy_efi] DIY-WB problems   bcroe at juno.com
• [Diy_efi] Gmecm list   mike katz
• [Diy_efi] Gmecm list   mike katz
• [Diy_efi] LT1 spark disassembly question   mike katz
• [Diy_efi] I must be asking lame questions.   mike katz
• [Diy_efi] I must be asking lame questions.   mike katz
• [Diy_efi] I must be asking lame questions.   mike katz
• [Diy_efi] I must be asking lame questions.   mike katz
• [Diy_efi] vortec engine piston noise?   mike katz
• [Diy_efi] vortec engine piston noise?   mike katz
• [Diy_efi] vortec engine piston noise?   mike katz
• [Diy_efi] vortec engine piston noise?   mike katz
• [Diy_efi] Noisy Votecs   mike katz
• [Diy_efi] vortec engine piston noise?   mike katz
• [Diy_efi] TBI and EFI computers   mike katz
• [Diy_efi] Knock Detection using GM ESC Module   marko.cosic
• [Diy_efi] Knock Detection using GM ESC Module   marko.cosic
• [Diy_efi] Ways to effectively use O2 sensor on motorcycle?   Neil.Poersch at mts.mb.ca
• [Diy_efi] : Le mans   bill.shurvinton at nokia.com
• Fw: [Diy_efi] compression ratio   bill.shurvinton at nokia.com
• Fw: [Diy_efi] compression ratio   bill.shurvinton at nokia.com
• [Diy_efi] : tuned port manifolds   bill.shurvinton at nokia.com
• [Diy_efi] injector unions   bill.shurvinton at nokia.com
• [Diy_efi] : tuned port manifolds   bill.shurvinton at nokia.com
• [Diy_efi] "Wet" Manifold Questions   bill.shurvinton at nokia.com
• [Diy_efi] : ask the clowns at CSH, HQexperts #1   bill.shurvinton at nokia.com
• [Diy_efi] : ask the experts #1   bill.shurvinton at nokia.com
• [Diy_efi] Searspoint Podium Pix...   bill.shurvinton at nokia.com
• [Diy_efi] finally...   bill.shurvinton at nokia.com
• [Diy_efi] On topic Aircraft EFI   bill.shurvinton at nokia.com
• [Diy_efi] Delphi alcohol injectors   bill.shurvinton at nokia.com
• [Diy_efi] Injector Info   bill.shurvinton at nokia.com
• [Diy_efi] Knock Detection using GM ESC Module   bill.shurvinton at nokia.com
• [Diy_efi] Knock Detection using GM ESC Module   bill.shurvinton at nokia.com
• [Diy_efi] Knock Detection using GM ESC Module   bill.shurvinton at nokia.com
• [Diy_efi] Knock Detection using GM ESC Module   bill.shurvinton at nokia.com
• [Diy_efi] Liquid Phase Propane Injectors   bill.shurvinton at nokia.com
• [Diy_efi] WB Calibration Problem?   bill.shurvinton at nokia.com
• [Diy_efi] Liquid Phase Propane Injectors   bill.shurvinton at nokia.com
• [Diy_efi] Connector for the DIY-WB Project   ptegler at cablespeed
• [Diy_efi] need help w/archives   ptegler at cablespeed
• [Diy_efi] Re: 2nd note... part of the reason $$ and features   ptegler at cablespeed
• [Diy_efi] finally...   ptegler at cablespeed
• [Diy_efi] 2.8 liter V6 in '88 jimmy   steve ravet
• [Diy_efi] I must be asking lame questions.   steve ravet
• [Diy_efi] I must be asking lame questions.   steve ravet
• [Diy_efi] need help w/archives   steve ravet
• [Diy_efi] vortec engine piston noise?   steve ravet
• [Diy_efi] vortec engine piston noise?   steve ravet
• [Diy_efi] finally...   steve ravet
• [Diy_efi] got the script, thanks.   steve ravet
• [Diy_efi] Re: [Gmecm] finally...   steve ravet
• [Diy_efi] wich efi to chose   steve ravet
• [Diy_efi] Re: GM Optical VSS   steve ravet
• [Diy_efi] Motronic fuel/ignition maps   rolfvandeburgt
• [Diy_efi] Re: [Gmecm] finally...   romans, mark
• [Diy_efi] I must be asking lame questions.   rr
• [Diy_efi] I must be asking lame questions.   rr
• [Diy_efi] I must be asking lame questions.   rr
• [Diy_efi] I must be asking lame questions.   rr
• [Diy_efi] WB02 not passing tests completely   rr
• [Diy_efi] WB02 not passing tests completely   rr
• [Diy_efi] WB02 not passing tests completely   rr
• [Diy_efi] : returnless fuel rails   rr
• [Diy_efi] (no subject)   rr
• [Diy_efi] DIY-WB problems   rr
• [Diy_efi] WB Calibration Problem?   rr
• [Diy_efi] : tuned port manifolds   goonie.gordon at talk21.com
• [Diy_efi] : tuned port manifolds   goonie.gordon at talk21.com
• [Diy_efi] : tuned port manifolds   goonie.gordon at talk21.com
• [Diy_efi] : tuned port manifolds   goonie.gordon at talk21.com
• [Diy_efi] : tuned port manifolds   goonie.gordon at talk21.com
• [Diy_efi] Hi All   pt telstra
• [Diy_efi] Hi All   pt telstra
• [Diy_efi] diy-wb parts kits   van setten, tim at ACSSD
• [Diy_efi] WB Calibration Problem?   van setten, tim at ACSSD
• [Diy_efi] ISO Interface for ISO -9141   derrick wiltshire
• [Diy_efi] unsuscribe   yo

Last message date: Fri May 31 23:55:39 GMT 2002
Archived on: Thu May 30 06:02:41 GMT 2013

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...