[Diy_efi] Another parts correction WB 23 May LED Display
bcroe at juno.com
bcroe at juno.com
Thu May 23 23:20:16 GMT 2002
OK,
its really hard getting all this paper right even after the thing
is working. The orderable supplier numbers were left off
for R1/R11/R12/R16 (1K 1/4W 1%) and for R5/R6/R7/R8
(4.7K 1/4W 5%). So here are those additions. The previous
18 ohm 1/2W error was already fixed. If this is going to cost
you a special order, just send $1 and I'll mail you those 10
resistors postpaid in USA. Bruce Roe, 2375 Parkview Av,
Aurora, IL 60504-9779
All vertical components have body over pin 1 (square via).
Part description
supplier and part #, DK=Digi*ey, JC=Jam*o
multiple #s; lower price or prefered first
C2, C3 4.7 mfd 12V
DK P5134-ND (10 mfd 16V cheap substitute)
C4, C5, C6, C7, C8, C10, C11 0.1 mfd bypass
DK 1210PHCT-ND
C9 optional noise/jitter filter
C12 47mfd 35V
DK P5181-ND
D1, D2, D3, D4 1N4004
DK 1N4007GICT-ND
D5 24 volt Transient Voltage Suppressor
DK 1.5KE24ADICT-ND
U11 7808 HEAT SINK required, tab may be grounded
DK NJM7808FA-ND
U2 LM2902N or LM324N
DK LM2902NNS-ND
U3, U4, U5, U6 LM3914N
JC 24230, DK LM3914N-1-ND
U7, U8 10 LED bar (RICH, green)
DK MV54164-ND, 160-1067-ND, 67-1008-ND
U9, U10 10 LED bar (LEAN, red)
DK MV57164-ND, 160-1066-ND, 67-1010-ND
J24 15 pin Min D Male
JC 71124, DK A23281-ND
R1, R11, R12, R16 1K 1/4 W 1%
DK 1.00KXBK-ND
R2, R4 3.6K 1/4 W 5%
DK 3.6KQBK-ND
R3 2.80K 1/4 W 1%
DK 2.80KXBK-ND
R5, R6, R7, R8 4.7K 1/4 W 5%
DK 4.7KQBK-ND
R9, R10 18 ohm 1/2 W 5%
DK 18H-ND
R13 61.9K 1/4 W 1%
DK 61.9KXBK-ND
R14 2.15K 1/4 W 1%
DK 2.15KXBK-ND
R15 82.5K 1/4 W 1%
DK 82.5KXBK-ND
R17 470 ohm 1/4 W 5%
DK 470QBK-ND
pin 1 has square via, polarized cap pin 1 = +
diodes pin 1 = anode, pin 2 (cathode) has band 23 MAY 02
_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi
More information about the Diy_efi
mailing list