[Diy_efi] WB02 not passing tests completely

[rr]

No, that is close enough.

BobR.


rob files wrote:

> It may be important that in step 12, I get 7.85 which is not within the
> 7.9-8.0 range.  I dismissed this earlier as "close enough."  Maybe it has
> something to do with it?
>
> -Rob
>
> >From: rr <RRauscher at nni.com>
> >Reply-To: Diy_efi at diy-efi.org
> >To: Diy_efi at diy-efi.org
> >Subject: Re: [Diy_efi] WB02 not passing tests completely
> >Date: Thu, 23 May 2002 16:27:25 -0400
> >
> >That doesn't sound right. If it is truely twice as long I'd look for
> >a resistor(s)/capacitors(s) that are mis-placed. Remember
> >that these time factors are +- 10% due to the available components.
> >
> >BobR.
> >
> >
> >
> >rob files wrote:
> >
> > > Hi all,
> > >
> > > For steps #34 and #42 there are time constants given.  For both tests,
> >my
> > > board takes roughly twice as long as specified.  Is this a problem, and
> >if
> > > so, where should I look?
> > >
> > > It passes all other tests with flying colors.
> > >
> > > Thanks,
> > > Rob
> > >


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi