[Diy_efi] Small Oxygen Sensors? (Newbie's first post)

Rich M richm at ntlworld.com
Sat May 25 16:37:29 GMT 2002


I believe this particular one to be a conventional zirconia sensor.
Rich

-----Original Message-----
From: diy_efi-admin at diy-efi.org [mailto:diy_efi-admin at diy-efi.org]On
Behalf Of Eric Fahlgren
Sent: 23 May 2002 13:37
To: Diy_efi at diy-efi.org
Subject: Re: [Diy_efi] Small Oxygen Sensors? (Newbie's first post)


Rich M wrote:
>
> Jamie, smallest one I've seen is used on late ('92-93) Ford Sierra
Cosworth
> 4x4. The sensor is mounted in the turbo exhaust housing and has a 12mm
> diameter thread instead of the 'normal' 18mm, it's a 3-wire heated sensor
.
> You're unlikely to find one cheap though - around £100GBP new.

Aren't those little ones usually titania instead of zirconia,
and thus have a different voltage output (1.0-5.0 v)?

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi



More information about the Diy_efi mailing list