[Diy_efi] : ask the experts #1

[Tom Sharpe]

Assuming the return-less surge tank with a float and needle/seat, the 
container would need to be vented like a holley float bowl, ie. return 
air/fumes to ??? or the pump might not be able to fill the tank. The high 
side usually returns to the surge tank but could return to the main.. but 
why..  

A surge tank w/ a low side fuel return could use the location of the return 
line to control the fuel level. The low side pump would need to pump max HP 
worth of fuel continuously. 
On Fri, 17 May 2002 14:03:17 +0100, <bill.shurvinton at nokia.com> wrote :

> Me dumb, but what is the difference between a vent line between surge and 
main tanks and a return line?
> 
> Bill
> 
> -----Original Message-----
> From: ext Tom Sharpe [mailto:twsharpe at dmz2.mtco.com]
> Sent: Friday, May 17, 2002 1:19 PM
> To: Diy_efi at diy-efi.org
> Subject: Re: [Diy_efi] : ask the experts #1
> 
> 
> Well spoken,  Might want to vent the return-less surge tank to the real 
> tank. A little pressure in both might be good.
> 
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://www.diy-efi.org/mailman/listinfo/diy_efi
> 
> 
> 

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi