[Diy_efi] fuel injection for an airplane engine

[William Shurvinton]

OK enough. Please find below the original post to this thread.

---------------
----- Original Message -----
From: Ron Larock <rlarock at attbi.com>
To: <diy_efi at diy-efi.org>
Sent: Saturday, May 25, 2002 9:46 PM
Subject: [Diy_efi] fuel injection for an airplane engine


> Dear Group,
>
> I'm not sure if I should subscribe to this list or not. Maybe after I get
> some information, it may be something I can do.
>
> I have a 0235 Lycoming airplane engine (235 cubic inch). These engines run
a
> little under 3000 rpm. I know I can buy electronic fuel injection for this
> engine, but it costs $5000 dollars. Would it be fairly easy to install a
> electronic fuel injection for this 4 cylinder engine or just pay the cost
if
> I ever get enough money?  This engine has magnetos, however, I will
replace
> one mag with electronic ignition.
>
> Thanks for the information and have a nice day
> Sincerely,
> Ron Larock
>
----------------
Read it and then decide who dropped in midway through the thread. I'll let
you off as it's monday and my wish to learn outweighs any need to get
niggly:-). I just want to set the original reference right.

Bill


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi