[Diy_efi] Anybody?

[William Shurvinton]

Slight ohms law problem there. 3 *2.8 is 8.4.
----- Original Message -----
From: Djfreggens at aol.com
To: diy_efi at diy-efi.org
Sent: Thursday, November 14, 2002 9:14 PM
Subject: Re: [Diy_efi] Anybody?


ok you can use a resistor or wire the injectors in seires. if you have 3 2.8
ohm injectors on seires the impednce will stay at 2.8 ohm. however if you
wire the same inj in parralele the impedence drops to .5 ohms. so either add
a 10ohm resistor to eahc inj or wire them in seires.


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi