[Diy_efi] LPG injection

[Derek]

----- Original Message -----
From: "Greg Hermann" <bearbvd at mindspring.com>
To: <diy_efi at diy-efi.org>
Sent: Saturday, November 23, 2002 3:09 PM
Subject: Re: [Diy_efi] LPG injection


At 3:11 AM 11/23/02, Derek wrote:
>> On the other hand, propane has a MUCH higher saturated vapor pressure, IAT
>> for IAT than methanol does, so you are quite likely to get MORE net charge
>> cooling from liquid propane than from methanol, regardless of the fact that
>> its latent heat of vaporization is less.
>
>So, give me some temp drops observed. I'd like to see them. I have dropped 90F
>down to 30F, with the sensor mounted in the throttle body (figured more cooling
>before the intake valve).
>
>Give me some real world results, not "quite likely."

Somebody else already quoted it for you. About -20° F  MAT with liquid
propane injection.

Greg



_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi