[Diy_efi] Turbos - spooling etc

[Mike]

<cough>

Putting it into the intake along the periphery of the comp,
would be far better - along with a burst of fuel, latency through
the system under those conditions would be short and the air/fuel
would provide useful power. Poor mans version of N2O injection.

rgds

mike




At 02:55 PM 4/1/03 +1000, you wrote:
>Fellas,
>    A crazy thought just occurred to me - does anyone know if the 
>following has been tried, and if so with what results:
>If a compressed air bottle was plumbed into the exhaust manifold 
>(pre-turbo) through an electronically controlled valve arranged to give 
>a (short) injection of HP air into the manifold when the WOT switch is 
>hit, it should help spool the turbo quickly and give a (false) lean 
>indication on the lambda sensor which should result in a brief 
>enrichment - Rats, just remembered - the Lambda is ignored at WOT - Just 
>a wild thought from someone with no direct experience playing with turbos.
>
>Bill W
>
>
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>http://www.diy-efi.org/mailman/listinfo/diy_efi
>
>

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi