[Diy_efi] Dimensions for TBI adapter

[Don Sauman]

Jim

I made one for a 2- bbl 360 AMC manifold by scanning (on an accurate scanner) a 2-bbl gasket and a TBI gasket and overlaying the barrels. I made a corel drawing of that and had it NC machined out of 1/2" aluminium.
I will grind the manifold intake ports to match the adapter.

I am sure you could do the same with a 4-bbl.

Cheers
Don

Jim Kyser wrote:

> All,
>
> I know there is a CAD drawing of the mount for a Rochester TBI unit on the ftp site, but it hasn't been completely restored yet. Does anyone have a local copy of this drawing they could send me. Even better, does someone have a drawing for a complete 4 barrel to TBI adapter? I have a brother-in-law who's a machinist and wants to make some extra cash working from his garage on the side. This should be an easy enough fab job for the equipment he has.
>
> Thanks!
>
> Jim Kyser
>
> _______________________________________________
> diy_efi mailing list
> diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi

--
Don Sauman
Documentary Photography and Video
CYTHERA Applied Research Consultants
Cythera Pty Ltd
Mob: 0413 746 695
Ph:  +61 8 9361 0337
Fax: +61 8 9361 0581
Email: donsauman at cythera.net


_______________________________________________
diy_efi mailing list
diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi