[Diy_efi] MGB EFI

[Tyler Madia]

So I'm guessing the problem with the siamesed intake ports on the MGB is the
fact that even port injection is a batch type of injection?  I could
certainly physically fit two injectors on each intake but they would have to
be fired sequentially?  Is that the problem?

Tyler

----- Original Message -----
From: <bill.shurvinton at nokia.com>
To: <diy_efi at diy-efi.org>
Sent: Thursday, February 06, 2003 2:27 AM
Subject: RE: [Diy_efi] MGB EFI


If you mean A-series with siamese ports, this can be done. There are even
kits available if you have big $$. These all use a single injector, TBI
style.

A home-brew 2 injector per port system is yet to be DIY'd although you could
pull the MPI system off a late model mini. However this is hightly complex
merely to meet emissions so of little use for the power hungry.

Bill
-----Original Message-----
From: ext Tyler Madia [mailto:tmadia at uswest.net]
Sent: Thursday, February 06, 2003 4:30 AM
To: diy_efi at diy-efi.org
Subject: [Diy_efi] MGB EFI


The archives were a bit vague on the subject of applying EFI to an MGB.  Did
anyone succeed with this endeavor?  It's definitely something I've always
wanted to do...

Thanks,
Tyler Madia

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi