[Diy_efi] schematic critique (now gas tank drawing)

[Toyota Supra]

a 90 degree -8 or -10 fitting is about 2.5" long, and thats about 1.5" more 
than i have as far as frame rail clearance, since the tank sits so low to 
the ground. having straights right out of the sides won't work because it 
puts it directly into the driveshaft location. i do not think there is 
enough room to go out of the front or rear of the tank either, but i would 
have to double check on that, and i'l have to see if the overall tank shape 
will allow that fitting, and a flat sealing surface for the nylon washers 
that are used with those.

and besides, this electronic circuit building task is just sooo sooo easy 
(dripping with sarcasm)  :)

actually i'm ready to bang my head on the tank in sheer frustration

but you are correct, the valve won't flow anywhere near enough fuel for my 
application

-j






From: Mike <erazmus at iinet.net.au>
>Reply-To: List for general do-it-yourself EFI talk <diy_efi at diy-efi.org>
>To: List for general do-it-yourself EFI talk <diy_efi at diy-efi.org>
>Subject: Re: [Diy_efi] schematic critique (now gas tank drawing)
>Date: Mon, 24 Feb 2003 10:05:30
>
>OK J,
>
>I see what the configuration is, ie Looks like one high pressure
>pump with a venturi to help draw fuel from the other side and
>guess you want to change it because you are either wanting more
>flow or pressure for presumably higher horse power or because
>you are unhappy with the existing balancing arrangement in
>so much as it could end up putting more on the pump side...
>
>Surely it should be possible to find somewhere on both sides of the
>tank to plumb a fitting, doesnt have to be 'straight down' can
>be sideways, one of those right angle types etc.
>
>rgds
>
>mike
>
>
>At 04:28 PM 21/2/2003 -0500, you wrote:
> >ok, you'll have to forgive this sad drawing, hopefully this helps make
> >sense, i don't have photoshop here
> >
> >here is the link http://68.7.7.84:8080/schematics/tankcomparison1.bmp
> >
> >a) yes, there is two of them
> >
> >b) no, there is not
> >
> >c) no, but there is no out of tank pump
> >
> >d) not sure what you mean, both pumps have pickup filters on them
> >
> >
> >
> >let me know what you think, thanks
> >
> >-j


_________________________________________________________________
Help STOP SPAM with the new MSN 8 and get 2 months FREE*  
http://join.msn.com/?page=features/junkmail


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi