[Diy_efi] This turbo assist stuff, suggestions

[Mike]

At 11:25 PM 1/2/03 +1300, you wrote:
>That price or better over here yes.

Know of any dealers that have a web address or email contact ?

>How did you fair on the IR scheme?

Fairly straightforward, few things to watch to make sure nothing
falls apart/in, might have to machine the housing a little, couple of
options. Electronic side is a cinch, mechanical side always
seems to be the ambiguous one <sigh> Have a few CPUs now in stock
to cover the timing, have an extrusion housing to take a DB9 for
RS232 - at this stage I just want some figures and resolution...
I prob wont get time to work on it for a month or so, Iv'e
been working in the lab for roughly 16hrs a day where his PC is <sigh>

Hey, just realised you are into RC, couple of queries,

a.	My youngest wants one of these tank track robots but its
	cable remote. We can work together to add a receiver and
	a cheap cpu to interpret the PWM fromt he 2 channels. But
	I want to a recevier which is same freq as the hand held txmtr
	he's using for his cheapy RC car - any suggestions on a 2 chan
	off the shelf receiver ?

b.	Bought to identical RC cars for both my kids xmas 2001 and
	had to mod one to run on 24Mhz instead of 27 (yes I know about
	allocations etc) but both have limited range - only about
	20m with fully charged batteries, any suggestions on moding
	the txmtr/recvr to get 50m range ?

rgds

mike



>-- 
>Matt Porritt
>RC Race Cars and Supplies
>ICQ #22776813
>
>
>On 2/1/03 10:39 PM Mike wrote
>
>> I hear its possible to get a rb25 head for the $500 mark in fair
>> (as is) condition in east states, but I already have a few SOHC
>> heads I can play with first :)
>
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>http://www.diy-efi.org/mailman/listinfo/diy_efi
>
>

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi