January 2003 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Wed Jan 1 00:11:01 GMT 2003
Ending: Fri Jan 31 23:50:20 GMT 2003
Messages: 880

• [Diy_efi] This turbo assist stuff, suggestions   Grant Beaty
• [Diy_efi] This turbo assist stuff, suggestions   Matt Porritt
• [Diy_efi] (SSS) Sequential Sync Signal??   Zane
• [Diy_efi] closed-loop at high load?   944Technologist
• [Diy_efi] This turbo assist stuff, suggestions   efi student
• [Diy_efi] This turbo assist stuff, suggestions   Matt Porritt
• [Diy_efi] This turbo assist stuff, suggestions   Mike
• [Diy_efi] This turbo assist stuff, suggestions   efi student
• [Diy_efi] This turbo assist stuff, suggestions   Grant Beaty
• [Diy_efi] Base Fuel Calculations..   Gregory Croft
• [Diy_efi] Base Fuel Calculations..   Mike
• [Diy_efi] This turbo assist stuff, suggestions   Matt Porritt
• [Diy_efi] This turbo assist stuff, suggestions   Matt Porritt
• [Diy_efi] This turbo assist stuff, suggestions   Mike
• [Diy_efi] This turbo assist stuff, suggestions   Matt Porritt
• [Diy_efi] This turbo assist stuff, suggestions   Mike
• [Diy_efi] This turbo assist stuff, suggestions   Bernd Felsche
• [Diy_efi] This turbo assist stuff, suggestions   Matt Porritt
• [Diy_efi] This turbo assist stuff, suggestions   Mike
• [Diy_efi] This turbo assist stuff, suggestions   Jay Wallace
• [Diy_efi] This turbo assist stuff, suggestions   Mike
• [Diy_efi] Base Fuel Calculations..   Tlsalt at aol.com
• [Diy_efi] This turbo assist stuff, suggestions   Jay Wallace
• [Diy_efi] This turbo assist stuff, suggestions   Grant Beaty
• [Diy_efi] This turbo assist stuff, suggestions   Mike
• [Diy_efi] This turbo assist stuff, suggestions   Greg Hermann
• [Diy_efi] This turbo assist stuff, suggestions   Matt Porritt
• [Diy_efi] This turbo assist stuff, suggestions   Matt Porritt
• [Diy_efi] This turbo assist stuff, suggestions   Bernd Felsche
• [Diy_efi] This turbo assist stuff, suggestions   Bernd Felsche
• [Diy_efi] This turbo assist stuff, suggestions   Bernd Felsche
• [Diy_efi] This turbo assist stuff, suggestions   Jay Wallace
• [Diy_efi] Chrysler ODB2 / VSS question   Martin Lebeau
• [Diy_efi] Ball Bearing vs. Plain Bearing   efi student
• [Diy_efi] Ball Bearing vs. Plain Bearing   Bernd Felsche
• [Diy_efi] Chrysler ODB2 / VSS question   Mike Schwall
• [Diy_efi] Chrysler ODB2 / VSS question   Djfreggens at aol.com
• [Diy_efi] Ball Bearing vs. Plain Bearing   Djfreggens at aol.com
• [Diy_efi] Ball Bearing vs. Plain Bearing   efi student
• [Diy_efi] Chrysler ODB2 / VSS question   Martin Lebeau
• [Diy_efi] Chrysler ODB2 / VSS question   Mike Schwall
• [Diy_efi] This turbo assist stuff, suggestions   Mike Schwall
• [Diy_efi] This turbo assist stuff, suggestions   Mike
• [Diy_efi] This turbo assist stuff, suggestions   Mike
• [Diy_efi] This turbo assist stuff, suggestions   Matt Porritt
• [Diy_efi] This turbo assist stuff, suggestions   Bernd Felsche
• [Diy_efi] This turbo assist stuff, suggestions   Mike
• [Diy_efi] This turbo assist stuff, suggestions   Mike
• [Diy_efi] This turbo assist stuff, suggestions   Bernd Felsche
• [Diy_efi] This turbo assist stuff, suggestions   Matt Porritt
• [Diy_efi] RE: please unsubscribe   Morne Vorster - CA Mngd Services
• [Diy_efi] Bruce?   Mike Diehl
• [Diy_efi] This turbo assist stuff, suggestions   Mike
• [Diy_efi] This turbo assist stuff, suggestions   Mike
• [Diy_efi] Bruce?   bill.shurvinton at nokia.com
• [Diy_efi] This turbo assist stuff, suggestions   Matt Porritt
• [Diy_efi] AT & MAP   Dave Dahlgren
• [Diy_efi] Injector Offsets for 30# Lucas   SBrough2 at aol.com
• [Diy_efi] This turbo assist stuff, suggestions   Mike
• [Diy_efi] mc3334 witout reluctor   Valladares Rodrigo
• [Diy_efi] Digifant (was:This turbo assist stuff...)   Bernd Felsche
• [Diy_efi] This turbo assist stuff, suggestions   Greg Hermann
• [Diy_efi] This turbo assist stuff, suggestions   Bernd Felsche
• [Diy_efi] Digifant   Mike
• [Diy_efi] Digifant (was:This turbo assist stuff...)   Mike
• [Diy_efi] Bruce?   Programmer
• [Diy_efi] Re: over a million turbos at that time and not one failure   Phil Lamovie
• [Diy_efi] Chrysler ODB2 / VSS question   Martin Lebeau
• [Diy_efi] Chrysler ODB2 / VSS question   Martin Lebeau
• Subject: Re: [Diy_efi] This turbo assist stuff, Questions!   Ohio Benz
• [Diy_efi] Re: over a million turbos at that time and not   Jay Wallace
• [Diy_efi] Re: over a million turbos at that time and not   Mike
• [Diy_efi] Chrysler ODB2 / VSS question   Jeffrey Engel
• [Diy_efi] Chrysler ODB2 / VSS question   Martin Lebeau
• [Diy_efi] RE: Diy_efi digest, Vol 1 #473 - 11 msgs   Patrick Cahill
• [Diy_efi] Chrysler ODB2 / VSS question   Jeffrey Engel
• [Diy_efi] Re: over a million turbos at that time and not one   Matt Porritt
• [Diy_efi] Re: Chrysler ODB2 / VSS question   Gerhard Mueller
• Subject: Re: [Diy_efi] This turbo assist stuff, Questions!   arnie
• [Diy_efi] This turbo assist stuff, suggestions   Mike Schwall
• [Diy_efi] Chrysler ODB2 / VSS question   Mike Schwall
• [Diy_efi] Bruce?   Daniel R. Nicoson
• [Diy_efi] This turbo assist stuff, suggestions   Bernd Felsche
• [Diy_efi] Digifant   Bernd Felsche
• [Diy_efi] Digifant (was:This turbo assist stuff...)   Bernd Felsche
• [Diy_efi] Area under torque curve?   Mike Diehl
• [Diy_efi] Ignition Semiconductor components?   Sendhil Solai
• [Diy_efi] Base Fuel Calculations..   Gregory Croft
• [Diy_efi] Chrysler ODB2 / VSS question   Djfreggens at aol.com
• Subject: Re: [Diy_efi] This turbo assist stuff, Questions!   Hugh Keir
• [Diy_efi] RB26 GTR stuff   Hugh Keir
• Subject: Re: [Diy_efi] This turbo assist stuff, Questions!   Matt Porritt
• [Diy_efi] RB26 GTR stuff   Matt Porritt
• [Diy_efi] digifant woes   Richards, Sean
• [Diy_efi] digifant woes   Bernd Felsche
• [Diy_efi] alt turbo fuel   BVicknair at bjservices.com
• [Diy_efi] Base Fuel Calculations..   Tlsalt at aol.com
• [Diy_efi] Area under torque curve?   Greg Hermann
• [Diy_efi] alt turbo fuel   bill.shurvinton at nokia.com
• [Diy_efi] alt turbo fuel   md4etal
• [Diy_efi] Area under torque curve?   Derek
• [Diy_efi] alt turbo fuel   Hugh Keir
• [Diy_efi] RB26 GTR stuff   Hugh Keir
• Subject: Re: [Diy_efi] This turbo assist stuff, Questions!   John Petersen
• Subject: Re: [Diy_efi] This turbo assist stuff, Questions!   Hugh Keir
• [Diy_efi] Area under torque curve?   Mike Diehl
• [Diy_efi] RB26 GTR stuff   Matt Porritt
• [Diy_efi] alt turbo fuel   Matt Porritt
• Subject: Re: [Diy_efi] This turbo assist stuff, Questions!   Matt Porritt
• [Diy_efi] Area under torque curve?   Alexander Guy
• [Diy_efi] Area under torque curve?   Brian Dessent
• [Diy_efi] Area under torque curve?   Marcell Gal
• [Diy_efi] Megasquirt for sale on Ebay   Larry Schuette
• [Diy_efi] Ignition Semiconductor components?   Joe Doty
• [Diy_efi] New to the site - PLEASE HELP!   Michael Michaelian
• [Diy_efi] Tunercat realsed Caldata   Djfreggens at aol.com
• [Diy_efi] ideas for ignition solutions?   Joe Doty
• [Diy_efi] northstar DIS and what it all means ?   Djfreggens at aol.com
• [Diy_efi] HKS EGT guage wiring   TVS
• [Diy_efi] closed-loop at high load?   Will Reeve
• [Diy_efi] Chrysler ODB2 / VSS question   Mike Schwall
• [Diy_efi] closed-loop at high load?   Mike Diehl
• [Diy_efi] HKS EGT guage wiring   Brian Dessent
• [Diy_efi] New to the site - PLEASE HELP!   WEG1192 at aol.com
• [Diy_efi] Area under torque curve?   Mike Diehl
• [Diy_efi] Water metanol turbo assist - was Argon turbo   Ohio Benz
• [Diy_efi] closed-loop at high load?   Allyn
• [Diy_efi] Area under torque curve?   Brian Dessent
• [Diy_efi] Area under torque curve?   Derek
• [Diy_efi] Water metanol turbo assist - was Argon turbo   Axel Rietschin
• [Diy_efi] Area under torque curve?   Greg Hermann
• [Diy_efi] Picking a EFI base system   TomQ
• [Diy_efi] Area under torque curve?   Bevan Weiss
• [Diy_efi] Base Fuel Calculations..   Gregory Croft
• [Diy_efi] northstar DIS and what it all means ?   John Stricker
• [Diy_efi] Area under torque curve?   Derek
• [Diy_efi] Water metanol turbo assist - was Argon turbo   arnie
• [Diy_efi] Water metanol turbo assist - was Argon turbo   mwp at overclockers.com.au
• [Diy_efi] Water metanol turbo assist - was Argon turbo   Greg Hermann
• [Diy_efi] Water metanol turbo assist - was Argon turbo   mwp at overclockers.com.au
• [Diy_efi] Water metanol turbo assist - was Argon turbo   Greg Hermann
• [Diy_efi] Water metanol turbo assist - was Argon turbo   arnie
• [Diy_efi] [Diy_efi]   Robert Paull
• [Diy_efi] Water metanol turbo assist - was Argon turbo   Jürgen Hartwig
• [Diy_efi] Water metanol turbo assist - was Argon turbo   arnie
• [Diy_efi] Water metanol turbo assist - was Argon turbo   Matt Porritt
• [Diy_efi] Water metanol turbo assist - was Argon turbo   Axel Rietschin
• [Diy_efi] Re: Water metanol turbo assist - was Argon turbo   Ohio Benz
• [Diy_efi] Water metanol turbo assist - was Argon turbo   arnie
• [Diy_efi] Water metanol turbo assist - was Argon turbo   Ohio Benz
• [Diy_efi] Area under torque curve?   mrbeau0
• [Diy_efi] Water metanol turbo assist - was Argon turbo   Matt Porritt
• [Diy_efi] Water metanol turbo assist - was Argon turbo   Adam Wade
• [Diy_efi] Area under torque curve?   Mike Diehl
• [Diy_efi] alt turbo fuel   md4etal
• [Diy_efi] Water metanol turbo assist   arnie
• [Diy_efi] Water metanol turbo assist   Adam Wade
• [Diy_efi] new to the DIY-EFI list   Aaron Bunch
• [Diy_efi] new guy, 1st question: where to by LSM-11 O2 sensor   Aaron Bunch
• [Diy_efi] alt turbo fuel   Bernd Felsche
• [Diy_efi] Water metanol turbo assist - was Argon turbo   Greg Hermann
• [Diy_efi] Water metanol turbo assist - was Argon turbo   Greg Hermann
• [Diy_efi] Water metanol turbo assist   Greg Hermann
• [Diy_efi] Water metanol turbo assist   Adam Wade
• [Diy_efi] Water metanol turbo assist   arnie
• [Diy_efi] Area under torque curve?   Mike Schwall
• [Diy_efi] new to the DIY-EFI list   Mike Diehl
• [Diy_efi] Water metanol turbo assist   arnie
• [Diy_efi] Water metanol turbo assist   Adam Wade
• [Diy_efi] Water metanol turbo assist   MarkoNTL
• [Diy_efi] Water metanol turbo assist   Adam Wade
• [Diy_efi] Water metanol turbo assist - was Argon turbo   Axel Rietschin
• [Diy_efi] Water metanol turbo assist - was Argon turbo   Axel Rietschin
• [Diy_efi] Base Fuel Calculations..   Tlsalt at aol.com
• [Diy_efi] Water metanol turbo assist - was Argon turbo   Ohio Benz
• [Diy_efi] RE: Diy_efi digest, Vol 1 #477 - 6 msgs   Richards, Sean
• [Diy_efi] Water metanol turbo assist   arnie
• [Diy_efi] Water metanol turbo assist   Greg Hermann
• [Diy_efi] Water metanol turbo assist   Greg Hermann
• [Diy_efi] Water metanol turbo assist   arnie
• [Diy_efi] Water metanol turbo assist   arnie
• [Diy_efi] Water metanol turbo assist - was Argon turbo   Greg Hermann
• [Diy_efi] Water metanol turbo assist   Greg Hermann
• [Diy_efi] 95 lt1 mass air to 88 Ford T-Bird 2.3L turbocoupe   Tim Graham
• [Diy_efi] Water metanol turbo assist - was Argon turbo   Axel Rietschin
• [Diy_efi] Pre-TB water/alky nozzle orientation   Grant Beaty
• [Diy_efi] Pre-TB water/alky nozzle orientation   Aaron Bunch
• [Diy_efi] Water metanol turbo assist - was Argon turbo   Adam Wade
• [Diy_efi] Water metanol turbo assist   Adam Wade
• [Diy_efi] Water metanol turbo assist   arnie
• [Diy_efi] RB26 GTR stuff   Hugh Keir
• [Diy_efi] Water metanol turbo assist   Derek
• [Diy_efi] alt turbo fuel   md4etal
• [Diy_efi] Water metanol turbo assist   md4etal
• [Diy_efi] Water metanol turbo assist   Adam Wade
• [Diy_efi] Water metanol turbo assist   Derek
• [Diy_efi] Water metanol turbo assist   Adam Wade
• [Diy_efi] Water metanol turbo assist   Greg Hermann
• [Diy_efi] Base Fuel Calculations..   Gregory Croft
• [Diy_efi] Water metanol turbo assist   Derek
• [Diy_efi] Water metanol turbo assist   Derek
• [Diy_efi] Water metanol turbo assist - was Argon turbo   Matt Porritt
• [Diy_efi] Water metanol turbo assist   Matt Porritt
• [Diy_efi] RB26 GTR stuff   Matt Porritt
• [Diy_efi] Pre-TB water/alky nozzle orientation   Matt Porritt
• [Diy_efi] Water metanol turbo assist   Greg Hermann
• [Diy_efi] Pre-TB water/alky nozzle orientation   Brian Michalk
• [Diy_efi] [ot] Comparative btus ?   Mike
• [Diy_efi] Pre-TB water/alky nozzle orientation   Matt Porritt
• [Diy_efi] Pre-TB water/alky nozzle orientation   Brian Michalk
• [Diy_efi] Base Fuel Calculations..   Tlsalt at aol.com
• [Diy_efi] How to read turbine RPM   Hugh Keir
• [Diy_efi] Water metanol turbo assist   Grant Beaty
• [Diy_efi] How to read turbine RPM   Andris Skulte
• [Diy_efi] Water metanol turbo assist - was Argon turbo   Ohio Benz
• [Diy_efi] How to read turbine RPM   Grant Beaty
• [Diy_efi] How to read turbine RPM   Scott Campbell.
• [Diy_efi] How to read turbine RPM   Axel Rietschin
• [Diy_efi] Turbine inlet & outlet pressures, housing A/Rs   Grant Beaty
• [Diy_efi] Turbine inlet & outlet pressures, housing A/Rs   Greg Hermann
• [Diy_efi] Tapping Metric Injector Threads   Brian Michalk
• [Diy_efi] How to read turbine RPM   Andris Skulte
• [Diy_efi] Pre-TB water/alky nozzle orientation   Matt Porritt
• [Diy_efi] How to read turbine RPM   Mike
• [Diy_efi] Water metanol turbo assist - was Argon turbo   Matt Porritt
• [Diy_efi] Tapping Metric Injector Threads   Matt Porritt
• [Diy_efi] Water metanol turbo assist - was Argon turbo   Grant Beaty
• [Diy_efi] New BMW 760, fuel pressure, direct inject   Mike
• [Diy_efi] Pre-TB water/alky nozzle orientation   Mike
• [Diy_efi] New BMW 760, fuel pressure, direct inject   Bernd Felsche
• [Diy_efi] New BMW 760, fuel pressure, direct inject   Mike
• [Diy_efi] Turbine inlet & outlet pressures, housing A/Rs   Grant Beaty
• [Diy_efi] Turbine inlet & outlet pressures, housing A/Rs   Grant Beaty
• [Diy_efi] Tapping Metric Injector Threads   Brian Michalk
• [Diy_efi] diy-wb mailing list   Jürgen Hartwig
• [Diy_efi] Turbine inlet & outlet pressures, housing A/Rs   Greg Hermann
• [Diy_efi] diy-wb mailing list   Mike
• [Diy_efi] Turbine inlet & outlet pressures, housing A/Rs   Greg Hermann
• [Diy_efi] diy-wb mailing list   r71chevy at earthlink.net
• [Diy_efi] diy-wb mailing list   r71chevy at earthlink.net
• [Diy_efi] diy-wb mailing list   Mike
• [Diy_efi] Separate turbo list?   Dan D'Andrea
• [Diy_efi] How to read turbine RPM   Tom Sharpe
• [Diy_efi] Separate turbo list?   r71chevy at earthlink.net
• [Diy_efi] How to read turbine RPM   Mike
• [Diy_efi] Separate turbo list?   Nick Starai
• [Diy_efi] Separate turbo list?   Mike
• [Diy_efi] New BMW 760, fuel pressure, direct inject   Perry Harrington
• [Diy_efi] diy-wb mailing list   Jürgen Hartwig
• [Diy_efi] Tapping Metric Injector Threads   Eck, Joel (Houston)
• [Diy_efi] Separate turbo list?   Gerald Pelnar
• [Diy_efi] RB26 GTR stuff   Hugh Keir
• [Diy_efi] diy-wb mailing list   steve ravet
• [Diy_efi] Separate turbo list?   Djfreggens at aol.com
• [Diy_efi] diy-wb mailing list   Jürgen Hartwig
• [Diy_efi] diy-wb mailing list   r71chevy at earthlink.net
• [Diy_efi] diy-wb mailing list   Eck, Joel (Houston)
• [Diy_efi] Separate turbo list?   Dave Dahlgren
• [Diy_efi] Separate turbo list?   Djfreggens at aol.com
• [Diy_efi] diy-wb mailing list   Jon V
• [Diy_efi] RE: Diy_efi digest, Vol 1 #488 - 13 msgs   Patrick Cahill
• [Diy_efi] Separate turbo list?   Mark Riley
• [Diy_efi] New BMW 760, fuel pressure, direct inject   Bernd Felsche
• [Diy_efi] diy-wb mailing list   Daniel R. Nicoson
• [Diy_efi] diy-wb mailing list   Shannen Durphey
• [Diy_efi] diy-wb mailing list   arnie
• [Diy_efi] diy-wb mailing list   mwp at overclockers.com.au
• [Diy_efi] RE: Diy_efi digest, Vol 1 #488 - 13 msgs   Mike
• [Diy_efi] diy-wb mailing list   Mike
• [Diy_efi] diy-wb mailing list   Mike
• [Diy_efi] diy-wb mailing list   Mos
• [Diy_efi] diy-wb mailing list   Bernd Felsche
• [Diy_efi] Bosch DI and Bimmers   Patrick Cahill
• [Diy_efi] diy-wb mailing list   Bernd Felsche
• [Diy_efi] New BMW 760, fuel pressure, direct inject   Mos
• [Diy_efi] New BMW 760, fuel pressure, direct inject   Bernd Felsche
• [Diy_efi] RB26 GTR stuff   Matt Porritt
• [Diy_efi] Water metanol turbo assist - was Argon turbo   Matt Porritt
• [Diy_efi] Pre-TB water/alky nozzle orientation   Matt Porritt
• [Diy_efi] Bosch DI and Bimmers   Mike
• [Diy_efi] Tapping Metric Injector Threads   Matt Porritt
• [Diy_efi] New BMW 760, fuel pressure, direct inject   Mike
• [Diy_efi] Separate turbo list?   Matt Porritt
• [Diy_efi] Pre-TB water/alky nozzle orientation   Greg Hermann
• [Diy_efi] Tapping Metric Injector Threads   Mike
• [Diy_efi] Tapping Metric Injector Threads   Greg Hermann
• [Diy_efi] New BMW 760, fuel pressure, direct inject   Greg Hermann
• [Diy_efi] New BMW 760, fuel pressure, direct inject   Mike
• [Diy_efi] Tapping Metric Injector Threads   Matt Porritt
• [Diy_efi] Tapping Metric Injector Threads   Matt Porritt
• [Diy_efi] Pre-TB water/alky nozzle orientation   Matt Porritt
• [Diy_efi] diy-wb mailing list   bcroe at juno.com
• [Diy_efi] Tapping Metric Injector Threads   Mike
• [Diy_efi] Tapping Metric Injector Threads   Matt Porritt
• [Diy_efi] New BMW 760, fuel pressure, direct inject   Matt Porritt
• [Diy_efi] Turbine inlet & outlet pressures, housing A/Rs   Grant Beaty
• [Diy_efi] Separate turbo list?   Grant Beaty
• [Diy_efi] test   Jon V
• [Diy_efi] test   jon at fatpump.com
• [Diy_efi] test and status   Jon V
• [Diy_efi] test, since I got a bounce :(   Mike
• [Diy_efi] Tapping Metric Injector Threads   Martin, Sam
• [Diy_efi]   BVicknair at bjservices.com
• [Diy_efi] wireless data logging   steve ravet
• [Diy_efi] Forced Induction-Performance Tuning, A. Graham Bell,   William Shurvinton
• [Diy_efi] Water metanol turbo assist   Derek
• [Diy_efi] Forced Induction-Performance Tuning, A. Graham   Eck, Joel (Houston)
• [Diy_efi] Forced Induction-Performance Tuning, A. Graham Bell,   Geddes, Brian J
• [Diy_efi] LCD displays for their wbo2   Hugh Keir
• [Diy_efi] LCD displays for their wbo2   John Stricker
• [Diy_efi] Chrysler ODB2 / VSS question   Martin Lebeau
• [Diy_efi] Chrysler ODB2 / VSS question   Adam Wade
• [Diy_efi] Chrysler ODB2 / VSS question   Bevan Weiss
• [Diy_efi] northstar DIS and what it all means ?   Tom Sharpe
• [Diy_efi] Chrysler ODB2 / VSS question   John Stricker
• [Diy_efi] northstar DIS and what it all means ?   John Stricker
• [Diy_efi] Forced Induction-Performance Tuning, A. Graham   Mike
• [Diy_efi] Base Fuel Calculations for turbo   md4etal
• [Diy_efi] Tapping Metric Injector Threads   Brian Michalk
• [Diy_efi] LCD displays for their wbo2   bcroe at juno.com
• [Diy_efi] displays for their wbo2   bcroe at juno.com
• [Diy_efi] displays for their wbo2   Donnie Freichels
• [Diy_efi] Wide Band o2.   Gregory Croft
• [Diy_efi] Wide Band o2.   Bob Wooten
• [Diy_efi] A Question   Shannen Durphey
• [Diy_efi] LCD displays for their wbo2   Shannen Durphey
• [Diy_efi] displays for their wbo2   Jeffrey Engel
• [Diy_efi] Turbine inlet & outlet pressures, housing A/Rs   Grant Beaty
• [Diy_efi] Turbine inlet & outlet pressures, housing A/Rs   Greg Hermann
• [Diy_efi] Digifant   Mike
• Banjo Dis. Pic ? Was Re: [Diy_efi] Turbine inlet & outlet   Mike
• [Diy_efi] Digifant (was:This turbo assist stuff...)   Mike
• [Diy_efi] Power supplies Was: Digifant (was:This turbo assist   Mos
• Banjo Dis. Pic ? Was Re: [Diy_efi] Turbine inlet & outlet   Greg Hermann
• [Diy_efi] Power supplies Was: Digifant (was:This turbo   Mike
• [Diy_efi] Oxygen Sensor Location   Van Setten, Tim at ACSSD
• Banjo Dis. Pic ? Was Re: [Diy_efi] Turbine inlet &   Mike
• [Diy_efi] "Maximum Boost" by Corky Bell   Dan D'Andrea
• [Diy_efi] Oxygen Sensor Location   Mike
• [Diy_efi] "Maximum Boost" by Corky Bell   Jeffrey Engel
• [Diy_efi] Water metanol turbo assist   Jeff Mars
• [Diy_efi] Oxygen Sensor Location   r71chevy at earthlink.net
• [Diy_efi] Water metanol turbo assist   Mike
• Banjo Dis. Pic ? Was Re: [Diy_efi] Turbine inlet &   PJR
• AW: [Diy_efi] RB26 GTR stuff   Rausch, Bernd
• AW: [Diy_efi] RB26 GTR stuff   Rausch, Bernd
• [Diy_efi] Turbine inlet & outlet pressures, housing A/Rs   Eck, Joel (Houston)
• [Diy_efi] "Maximum Boost" by Corky Bell   Geddes, Brian J
• [Diy_efi] re: O2 sensor location   Bart Grande
• [Diy_efi] Separate turbo list?   Jim Sloan
• [Diy_efi] Water metanol turbo assist (Greg H)   Derek
• [Diy_efi] GM 1227747 for a '82 BMW 323i (CIS->EFI)?   Tomas Sokorai Sch.
• [Diy_efi] Seen one, want LOTS more !!   Greg Hermann
• [Diy_efi] Digifant (was:This turbo assist stuff...)   Bernd Felsche
• [Diy_efi] Water metanol turbo assist (Greg H)   Greg Hermann
• [Diy_efi] Seen one, want LOTS more !!   Oolan Zimmer
• [Diy_efi] Water metanol turbo assist   Greg Hermann
• [Diy_efi] Seen one, want LOTS more !!   Greg Hermann
• [Diy_efi] Seen one, want LOTS more !!   Oolan Zimmer
• [Diy_efi] Seen one, want LOTS more !!   Greg Hermann
• [Diy_efi] Chrysler ODB2 / VSS question   Martin Lebeau
• [Diy_efi] Chrysler ODB2 / VSS question   Bevan Weiss
• [Diy_efi] Seen one, want LOTS more !!   Donnie Freichels
• [Diy_efi] Chrysler ODB2 / VSS question   Mark Riley
• [Diy_efi] Chrysler ODB2 / VSS question   Bevan Weiss
• [Diy_efi] Chrysler ODB2 / VSS question   Shannen Durphey
• [Diy_efi] Pre-TB water/alky nozzle orientation   Joseph Obernberger
• [Diy_efi] re: O2 sensor location   Mike
• [Diy_efi] Water metanol turbo assist   Mike
• [Diy_efi] Water metanol turbo assist   Djfreggens at aol.com
• [Diy_efi] Digifant (was:This turbo assist stuff...)   Mike
• [Diy_efi] Chrysler ODB2 / VSS question   Mike
• [Diy_efi] Digifant (was:This turbo assist stuff...)   Bernd Felsche
• [Diy_efi] Digifant (was:This turbo assist stuff...)   Mike
• [Diy_efi] Tapping Metric Injector Threads   Patrick Cahill
• [Diy_efi] Digifant - pinning down a detail   Mike
• [Diy_efi] Seen one, want LOTS more !!   Grant Beaty
• [Diy_efi] Seen one, want LOTS more !!   Grant Beaty
• [Diy_efi] Water metanol turbo assist   William Shurvinton
• [Diy_efi] Water metanol turbo assist   Patrick Cahill
• [Diy_efi] re: O2 sensor location   Mike Poulson
• [Diy_efi] Seen one, want LOTS more !!   Greg Hermann
• [Diy_efi] Tapping Metric Injector Threads   Greg Hermann
• [Diy_efi] Tapping Metric Injector Threads   Joshua Wingell
• [Diy_efi] Carefull we're becoming mainstream   Phil Lamovie
• [Diy_efi] Carefull we're becoming mainstream   Djfreggens at aol.com
• [Diy_efi] Pre-TB water/alky nozzle orientation   Brian Michalk
• [Diy_efi] GM 1227747 for a '82 BMW 323i (CIS->EFI)?   steve ravet
• [Diy_efi] Carefull we're becoming mainstream   Adam Wade
• [Diy_efi] RB26 GTR stuff   Hugh Keir
• [Diy_efi] Carefull we're becoming mainstream   Eck, Joel (Houston)
• [Diy_efi] Carefull we're becoming mainstream   Adam Wade
• [Diy_efi] Seen one, want LOTS more !!   Oolan Zimmer
• [Diy_efi] RB26 GTR stuff   Matt Porritt
• [Diy_efi] Seen one, want LOTS more !!   Greg Hermann
• [Diy_efi] Mitsubishi GDI (Newbie)   joeld
• [Diy_efi] Seen one, want LOTS more !!   Djfreggens at aol.com
• [Diy_efi] Mitsubishi GDI (Newbie)   Djfreggens at aol.com
• [Diy_efi] Mitsubishi GDI (Newbie)   William Shurvinton
• [Diy_efi] Mitsubishi GDI (Newbie)   William Shurvinton
• [Diy_efi] Mitsubishi GDI (Newbie)   Djfreggens at aol.com
• [Diy_efi] Mitsubishi GDI (Newbie)   William Shurvinton
• [Diy_efi] Mitsubishi GDI (Newbie)   Djfreggens at aol.com
• [Diy_efi] Pre-TB water/alky nozzle orientation   Joseph Obernberger
• [Diy_efi] Pre-TB water/alky nozzle orientation   Mike
• [Diy_efi] Pre-TB water/alky nozzle orientation   Mike
• [Diy_efi] Pre-TB water/alky nozzle orientation   arnie
• [Diy_efi] Re: Gentlemen, Start Hacking Your Engines   Phil Lamovie
• [Diy_efi] old zytec em2 ecu   steve
• [Diy_efi] Water methanol turbo assist.   Patrick Cahill
• [Diy_efi] GM Throttle Drive By Wire   Blue MaxMax
• [Diy_efi] RE: Diy_efi Digest, Vol 1, Issue 506   Patrick Cahill
• [Diy_efi] RE: Diy_efi Digest, Vol 1, Issue 506   Djfreggens at aol.com
• [Diy_efi] RE: Diy_efi Digest, Vol 1, Issue 506   joeld
• [Diy_efi] Importance of TPS with lightweight cars   William Shurvinton
• [Diy_efi] Importance of TPS with lightweight cars   Adam Wade
• [Diy_efi] Unsubscribe   ColoradoArmory
• [Diy_efi] Importance of TPS with lightweight cars   Shannen Durphey
• [Diy_efi] Unsubscribe   Shannen Durphey
• [Diy_efi] Importance of TPS with lightweight cars   Djfreggens at aol.com
• [Diy_efi] Importance of TPS with lightweight cars   Shannen Durphey
• [Diy_efi] RE: Diy_efi Digest, Vol 1, Issue 506   Mike
• [Diy_efi] RE: Diy_efi Digest, Vol 1, Issue 506   efi student
• [Diy_efi] RE: Diy_efi Digest, Vol 1, Issue 506   Chris McKinnon
• [Diy_efi] RE: Diy_efi Digest, Vol 1, Issue 506   Mike
• [Diy_efi] RE: Diy_efi Digest, Vol 1, Issue 506   Mike
• [Diy_efi] RE: Diy_efi Digest, Vol 1, Issue 506   efi student
• [Diy_efi] RE: Diy_efi Digest, Vol 1, Issue 506   Mike
• [Diy_efi] GDI cont'd   joeld
• [Diy_efi] GDI cont'd   efi student
• [Diy_efi] RE: Diy_efi Digest, Vol 1, Issue 506   efi student
• [Diy_efi] RE: Diy_efi Digest, Vol 1, Issue 506   Chris McKinnon
• [Diy_efi] Importance of TPS with lightweight cars   Dave Dahlgren
• [Diy_efi] Importance of TPS with lightweight cars   William Shurvinton
• [Diy_efi] Importance of TPS with lightweight cars   William Shurvinton
• [Diy_efi] Importance of TPS with lightweight cars   William Shurvinton
• [Diy_efi] Data Logging with LT1 PCM   SBrough2 at aol.com
• [Diy_efi] Importance of TPS with lightweight cars   Mike
• [Diy_efi] Water Injection (Injector Position) the Cosworth way   Axel Rietschin
• [Diy_efi] Water Injection (Injector Position) the Cosworth way   Axel Rietschin
• [Diy_efi] Water Injection (Injector Position) the Cosworth   Mike
• [Diy_efi] Importance of TPS with lightweight cars   William Shurvinton
• [Diy_efi] Water Injection (Injector Position) the Cosworth way   Axel Rietschin
• [Diy_efi] Re: GDI and why   Phil Lamovie
• [Diy_efi] Re: Computer geeks overclocking their cars   Phil Lamovie
• [Diy_efi] GDI cont'd   Greg Hermann
• [Diy_efi] GDI cont'd   William Shurvinton
• [Diy_efi] GDI Cont'd   joeld
• [Diy_efi] GDI cont'd   efi student
• [Diy_efi] Re: GDI and why   efi student
• [Diy_efi] Re: GDI and why   Perry Harrington
• [Diy_efi] Importance of TPS with lightweight cars   Adam Wade
• [Diy_efi] Importance of TPS with lightweight cars   Adam Wade
• [Diy_efi] Importance of TPS with lightweight cars   William Shurvinton
• [Diy_efi] Seen one, want LOTS more !!   ECMnut at aol.com
• [Diy_efi] Need URL, re: F-Body 7749 changover.   ECMnut at aol.com
• [Diy_efi] Need URL, re: F-Body 7749 changover.   WEG1192 at aol.com
• [Diy_efi] GDI cont'd   Bernd Felsche
• [Diy_efi] GDI Cont'd   Bernd Felsche
• [Diy_efi] Importance of TPS with lightweight cars   Adam Wade
• [Diy_efi] Need URL, re: F-Body 7749 changover.   SBrough2 at aol.com
• [Diy_efi] Need URL, re: F-Body 7749 changover.   ECMnut at aol.com
• [Diy_efi] GDI Cont'd   Mike
• [Diy_efi] GDI cont'd   Mike
• [Diy_efi] RE: Banjo Dis. Pic   Mike
• [Diy_efi] GDI Cont'd   Bernd Felsche
• [Diy_efi] GDI Cont'd   Mike
• [Diy_efi] GDI Cont'd   Bernd Felsche
• [Diy_efi] boosted compression ratio   Bill Washington
• [Diy_efi] GDI Cont'd   Mike
• [Diy_efi] boosted compression ratio   Mike
• [Diy_efi] boosted compression ratio   Djfreggens at aol.com
• [Diy_efi] Pre-TB water/alky nozzle orientation   Bernd Felsche
• [Diy_efi] GDI Cont'd   Bernd Felsche
• [Diy_efi] boosted compression ratio   Bernd Felsche
• [Diy_efi] Timing Advance Curve?   Bill Washington
• [Diy_efi] RE: Banjo Dis. Pic   Grant Beaty
• [Diy_efi] Importance of TPS with lightweight cars   bill.shurvinton at nokia.com
• [Diy_efi] Importance of TPS with lightweight cars   Dave Dahlgren
• [Diy_efi] Importance of TPS with lightweight cars   Shannen Durphey
• [Diy_efi] Importance of TPS with lightweight cars   Shannen Durphey
• [Diy_efi] Importance of TPS with lightweight cars   Ne14RoxCJ at aol.com
• [Diy_efi] Standard for measuing airflow   Grant Beaty
• [Diy_efi] boosted compression ratio   steve ravet
• [Diy_efi] RB26 GTR stuff   Rausch, Bernd
• [Diy_efi] RB26 GTR stuff   Rausch, Bernd
• [Diy_efi] RB26 GTR stuff   Rausch, Bernd
• [Diy_efi] Importance of TPS with lightweight cars   Adam Wade
• [Diy_efi] Standard for measuing airflow   Djfreggens at aol.com
• [Diy_efi] VW/Audi 1.8T (Bosch) fuel injector info needed   Scott F. Williams
• [Diy_efi] Standard for measuing airflow   William Shurvinton
• [Diy_efi] Standard for measuing airflow   Jeffrey Engel
• [Diy_efi] Standard for measuing airflow   Donnie Freichels
• [Diy_efi] Importance of TPS with lightweight cars   William Shurvinton
• [Diy_efi] Additives   Bill Washington
• [Diy_efi] Standard for measuing airflow   Djfreggens at aol.com
• [Diy_efi] Importance of TPS with lightweight cars   Adam Wade
• [Diy_efi] Standard for measuing airflow   Grant Beaty
• [Diy_efi] Re: Diy_efi digest, Vol 1 #458 - 6 msgs   Bill Washington
• [Diy_efi] 12V vs 42V   bcroe at juno.com
• [Diy_efi] Re: Diy_efi digest, Vol 1 #462 - 14 msgs   Bill Washington
• [Diy_efi] Importance of TPS with lightweight cars   Mike
• [Diy_efi] RB26 GTR stuff   Lachlan Chapman
• [Diy_efi] newbie   The McConnell's
• [Diy_efi] Additives   Mike
• [Diy_efi] newbie   Djfreggens at aol.com
• [Diy_efi] 12V vs 42V   Mike
• [Diy_efi] RB26 GTR stuff   Matt Porritt
• [Diy_efi] RB26 GTR stuff   Matt Porritt
• [Diy_efi] Importance of TPS with lightweight cars   Shannen Durphey
• [Diy_efi] RB26 GTR stuff   Lachlan Chapman
• [Diy_efi] RE: Banjo Dis. Pic   Mike
• [Diy_efi] RE: Banjo Dis. Pic --- Throttling intake air   Brian Michalk
• [Diy_efi] Importance of TPS with lightweight cars   Ne14RoxCJ at aol.com
• [Diy_efi] RE: Banjo Dis. Pic   Greg Hermann
• [Diy_efi] RE: Banjo Dis. Pic --- Throttling intake air   Greg Hermann
• [Diy_efi] RE: Banjo Dis. Pic --- Throttling intake air   Mike
• [Diy_efi] RE: Banjo Dis. Pic --- Throttling intake air   Mike
• [Diy_efi] RE: Banjo Dis. Pic --- Throttling intake air   Mike
• [Diy_efi] RE: Throttling intake air   Brian Michalk
• [Diy_efi] RE: Banjo Dis. Pic   Mike
• [Diy_efi] RE: Throttling intake air   Brian Michalk
• [Diy_efi] RE: Throttling intake air   Mike
• [Diy_efi] RE: Banjo Dis. Pic --- Throttling intake air   Marcell Gal
• [Diy_efi] RE: Throttling intake air   Brian Michalk
• [Diy_efi] RB26 GTR stuff   Hugh Keir
• [Diy_efi] Base Fuel Calculations..   Kelley, Damon
• [Diy_efi] RE: Throttling intake air   Greg Hermann
• [Diy_efi] RE: Throttling intake air   Greg Hermann
• [Diy_efi] RE: Banjo Dis. Pic --- Throttling intake air   Greg Hermann
• [Diy_efi] Re: GDI and why   Brian Dessent
• [Diy_efi] Importance of TPS with lightweight cars   Shannen Durphey
• [Diy_efi] RE: Throttling intake air -- references   Brian Michalk
• [Diy_efi] Re: Diy_efi digest, Vol 1 #488 - 13 msgs   Bill Washington
• [Diy_efi] RE: Throttling intake air   steve ravet
• [Diy_efi] RE: Throttling intake air   Djfreggens at aol.com
• [Diy_efi] Bosch vs Nippon Denso injectors   Matt Porritt
• [Diy_efi] RE: Throttling intake air   Greg Hermann
• [Diy_efi] RE: Throttling intake air -- references   Axel Rietschin
• [Diy_efi] Importance of TPS with lightweight cars   bill.shurvinton at nokia.com
• [Diy_efi] RE: Throttling intake air   Djfreggens at aol.com
• [Diy_efi] RE: Throttling intake air -- references   Brian Michalk
• [Diy_efi] RE: Throttling intake air -- references   Mike
• [Diy_efi] RE: Throttling intake air -- references   MarkoNTL
• [Diy_efi] RE: Throttling intake air -- references   Brian Michalk
• [Diy_efi] RE: Throttling intake air -- references   Mike
• [Diy_efi] RE: Throttling intake air -- references   Djfreggens at aol.com
• [Diy_efi] RE: Throttling intake air -- references   Mike
• [Diy_efi] RE: Throttling intake air -- references   Mike
• [Diy_efi] RE: Throttling intake air -- references   Djfreggens at aol.com
• [Diy_efi] Four Gas Analyzer - What to look for   Daniel R. Nicoson
• [Diy_efi] Re: Diy_efi Digest, Vol 1, Issue 524   Tlsalt at aol.com
• [Diy_efi] RE: Banjo Dis. Pic   Grant Beaty
• [Diy_efi] Four Gas Analyzer - What to look for   Adam Wade
• [Diy_efi] RE: Throttling intake air -- references   Grant Beaty
• [Diy_efi] RE: Throttling intake air -- references   Dave Dahlgren
• [Diy_efi] 12V vs 42V   Lasse Langwadt Christensen
• [Diy_efi] Four Gas Analyzer - What to look for   Daniel R. Nicoson
• [Diy_efi] RE: Throttling intake air -- references   Lasse Langwadt Christensen
• [Diy_efi] RE: Banjo Dis. Pic   Brian Michalk
• [Diy_efi] Re: Diy_efi Digest, Vol 1, Issue 524   Axel Rietschin
• [Diy_efi] Four Gas Analyzer - What to look for   Robert W Hughes
• [Diy_efi] Four Gas Analyzer - What to look for   Adam Wade
• [Diy_efi] RE: Banjo Dis. Pic   Grant Beaty
• [Diy_efi] Small A/R, big WG (was: Throttling intake air --   Axel Rietschin
• [Diy_efi] Re: Diy_efi Digest, Vol 1, Issue 524   Axel Rietschin
• [Diy_efi] RE: Banjo Dis. Pic   Greg Hermann
• [Diy_efi] RE: Throttling intake air -- references   Mike
• [Diy_efi] RE: Throttling intake air -- references   Mike
• [Diy_efi] RE: Banjo Dis. Pic   Mike
• [Diy_efi] RE: Throttling intake air -- references   Dave Dahlgren
• [Diy_efi] RE: Throttling intake air -- references   Mike
• [Diy_efi] Diy_efi Digest, Vol 1, Issue 524   Tlsalt at aol.com
• [Diy_efi] RE: Throttling intake air -- references   Grant Beaty
• [Diy_efi] RE: Throttling intake air -- references   Mike
• [Diy_efi] RE: Throttling intake air -- references   Dave Dahlgren
• [Diy_efi] RE: Throttling intake air -- references   Mike
• [Diy_efi] RE: Throttling intake air -- references   Ohio Benz
• [Diy_efi] RE: Throttling intake air -- references   Mike
• [Diy_efi] RE: Throttling intake air -- references   Andrew Theurer
• [Diy_efi] RE: Throttling intake air -- references   bill.shurvinton at nokia.com
• [Diy_efi] RE: Throttling intake air -- references   Erik Jacobs
• [Diy_efi] Diy_efi Digest, Vol 1, Issue 524   Mike
• [Diy_efi] RE: Throttling intake air -- references   Mike
• [Diy_efi] Diy_efi Digest, Vol 1, Issue 524   Mike
• [Diy_efi] Diy_efi Digest, Vol 1, Issue 524   Marcell Gal
• [Diy_efi] RE: Throttling intake air -- references   Grant Beaty
• [Diy_efi] RE: Throttling intake air -- references   Grant Beaty
• [Diy_efi] Download ML3.1 DME Schematic   FR Wilk
• [Diy_efi] RE: Throttling intake air   Bill Washington
• [Diy_efi] RE: Throttling intake air   Adam Wade
• [Diy_efi] RE: Throttling intake air   Perry Harrington
• [Diy_efi] RE: Throttling intake air   Adam Wade
• [Diy_efi] RE: Throttling intake air   Perry Harrington
• [Diy_efi] RE: Throttling intake air -- references   Tom Sharpe
• [Diy_efi] RE: Throttling intake air   efi student
• [Diy_efi] Analog input->Character LCD display?   Derek
• [Diy_efi] RE: Throttling intake air   Greg Hermann
• [Diy_efi] RE: Throttling intake air   Greg Hermann
• [Diy_efi] Analog input->Character LCD display?   md4etal
• [Diy_efi] RE: Throttling intake air   Greg Hermann
• [Diy_efi] Quoting may be getting excessive   Dan D'Andrea
• [Diy_efi] Quoting may be getting excessive   Eric Deslauriers
• [Diy_efi] Analog input->Character LCD display?   steve ravet
• [Diy_efi] safc to read air /fuel   Donnie Freichels
• [Diy_efi] Wiring Diagram Software (OT)   MarkoNTL
• [Diy_efi] Wiring Diagram Software (OT)   Brian Michalk
• [Diy_efi] (OT) FOR SALE: Holley Pro-jection 4 EFI System   PJR
• [Diy_efi] Wiring Diagram Software (OT)   MarkoNTL
• [Diy_efi] Wiring Diagram Software (OT)   Mike Kelble
• [Diy_efi] Wiring Diagram Software (OT)   Bernd Felsche
• [Diy_efi] DIY-EFI References   Andy Beck
• [Diy_efi] Help with LM3914 (10-segment LED driver)   Derek
• [Diy_efi] Help with LM3914 (10-segment LED driver)   Perry Harrington
• Subject: [Diy_efi] Wiring Diagram Software (OT)   Ohio Benz
• Subject: [Diy_efi] Wiring Diagram Software (OT)   Jeffrey Engel
• [Diy_efi] safc to read air /fuel   Joseph Obernberger
• [Diy_efi] Burning a chip   Chuck Kahler
• Subject: [Diy_efi] Wiring Diagram Software (OT)   Marc Reibel
• [Diy_efi] RE: Throttling intake air   Mike
• [Diy_efi] GM Drive-By-Wire Throttle Body   Blue MaxMax
• [Diy_efi] safc to read air /fuel   Dan D'Andrea
• [Diy_efi] safc to read air /fuel   Geddes, Brian J
• [Diy_efi] safc to read air /fuel   Erik Jacobs
• [Diy_efi] Thermal barrier coatings   "Raymond Brantley" at avalon.siteprotect.com
• [Diy_efi] safc to read air /fuel   Donnie Freichels
• [Diy_efi] Thermal barrier coatings   John Stricker
• [Diy_efi] Thermal barrier coatings   Scott & Jennifer Peitzsch
• [Diy_efi] Thermal barrier coatings   Allyn
• [Diy_efi] Bosch V Nippon Denso Injectors.   Patrick Cahill
• [Diy_efi] could i have multiple bad injectors?   Toyota Supra
• [Diy_efi] Thermal barrier coatings   Gerard
• [Diy_efi] could i have multiple bad injectors?   JET
• [Diy_efi] Bosch V Nippon Denso Injectors.   Matt Porritt
• [Diy_efi] Bosch V Nippon Denso Injectors.   JET
• [Diy_efi] Bosch V Nippon Denso Injectors.   Matt Porritt
• [Diy_efi] Bosch V Nippon Denso Injectors.   JET
• [Diy_efi] Bosch V Nippon Denso Injectors.   Matt Porritt
• [Diy_efi] could i have multiple bad injectors?   Ohio Benz
• [Diy_efi] Thermal barrier coatings   Ohio Benz
• [Diy_efi] Bosch V Nippon Denso Injectors.   bill.shurvinton at nokia.com
• [Diy_efi] could i have multiple bad injectors?   Mike
• [Diy_efi] Thermal barrier coatings   Greg Hermann
• [Diy_efi] Thermal barrier coatings   John Stricker
• [Diy_efi] Thermal barrier coatings   Ohio Benz
• [Diy_efi] Bosch V Nippon Denso Injectors.   Hugo Normand
• [Diy_efi] Thermal barrier coatings   Shannen Durphey
• [Diy_efi] could i have multiple bad injectors?   Toyota Supra
• [Diy_efi] could i have multiple bad injectors?   Mike
• [Diy_efi] could i have multiple bad injectors?   Toyota Supra
• [Diy_efi] problem with bosch AFC   Alex Martí Rospigliosi
• [Diy_efi] Bosch V Nippon Denso Injectors.   Matt Porritt
• [Diy_efi] could i have multiple bad injectors?   Dave Dahlgren
• [Diy_efi] could i have multiple bad injectors?   Toyota Supra
• [Diy_efi]   Kempower Motorsport NV
• [Diy_efi] Re: Diy_efi Digest, Vol 1, Issue 537   Bill Washington
• [Diy_efi] VW/Audi 1.8T (Bosch) fuel injector info needed (Scott   Scott F. Williams
• [Diy_efi] Thermal barrier coatings   arnie
• [Diy_efi] Thermal barrier coatings   Adam Wade
• [Diy_efi] Thermal barrier coatings   Greg Hermann
• [Diy_efi] Thermal barrier coatings   Greg Hermann
• [Diy_efi] GM MPI on AMC V8 project   Kenneth Gaines
• [Diy_efi] GM MPI on AMC V8 project   steve ravet
• [Diy_efi] GM MPI on AMC V8 project   Scot Sealander
• [Diy_efi] WI, methanol, and corrosion   Chris Wilson
• [Diy_efi] WI, methanol, and corrosion   Chris Wilson
• [Diy_efi] WI, methanol, and corrosion   bill.shurvinton at nokia.com
• [Diy_efi] "higher" band oxygen sensor: snake oil or legitimate?   Scott F. Williams
• [Diy_efi] could i have multiple bad injectors?   Mike
• [Diy_efi] "higher" band oxygen sensor: snake oil or legitimate?   bill.shurvinton at nokia.com
• [Diy_efi] "higher" band oxygen sensor: snake oil or legitimat   Gorden Jennings
• [Diy_efi] "higher" band oxygen sensor: snake oil or legitimat   ddudley at PaymentOne.com
• [Diy_efi] More about the GM HEI to AMC V8   Kenneth Gaines
• [Diy_efi] More about the GM HEI to AMC V8   Eck, Joel (Houston)
• [Diy_efi] WI, methanol, and corrosion   Adam Wade
• [Diy_efi] WI, methanol, and corrosion   Mike
• [Diy_efi] "higher" band oxygen sensor: snake oil or legitimat e?   Andrew Theurer
• [Diy_efi] could i have multiple bad injectors?   Toyota Supra
• [Diy_efi] WI, methanol, and corrosion   Greg Hermann
• [Diy_efi] anybody hacking chrysler ?   Djfreggens at aol.com
• [Diy_efi] WI, methanol, and corrosion   Greg Hermann
• [Diy_efi] WI, methanol, and corrosion   Scott F. Williams
• [Diy_efi] WI, methanol, and corrosion   William Shurvinton
• [Diy_efi] "higher" band oxygen sensor: snake oil or legitimat   Greg Hermann
• [Diy_efi] WI, methanol, and corrosion   Greg Hermann
• [Diy_efi] RE: More about the GM HEI and AMC V8   Eck, Joel (Houston)
• [Diy_efi] RE: More about the GM HEI and AMC V8   Kenneth Gaines
• [Diy_efi] could i have multiple bad injectors?   JET
• [Diy_efi] could i have multiple bad injectors?   Toyota Supra
• [Diy_efi] Off Topic....nozzle atomization   Nick Starai
• [Diy_efi] GM MPI on AMC V8 project   Shannen Durphey
• [Diy_efi] RE: More about the GM HEI and AMC V8   Shannen Durphey
• [Diy_efi] Off Topic....nozzle atomization   arnie
• [Diy_efi] WI, methanol, and corrosion   Marcell Gal
• [Diy_efi] RE: More about the GM HEI and AMC V8   WEG1192 at aol.com
• [Diy_efi] Grounding issues with Honda ECU   Peter Vieth
• [Diy_efi] Grounding issues with Honda ECU   Perry Harrington
• [Diy_efi] 25A Solid State Relay   FR Wilk
• [Diy_efi] Off Topic....nozzle atomization   Toyota Supra
• [Diy_efi] 25A Solid State Relay   bcroe at juno.com
• [Diy_efi] Fast response RTD sensor   Derek
• [Diy_efi] Fast response RTD sensor (2)   Derek
• [Diy_efi] Injector operation   peterw
• [Diy_efi] Injector operation   Adam Wade
• [Diy_efi] WI, methanol, and corrosion   Axel Rietschin
• [Diy_efi] Injector operation   peterw
• [Diy_efi] WI, methanol, and corrosion   Greg Hermann
• [Diy_efi] 4cyl MAP TBI (was GM HEI)   Dan Griffin
• [Diy_efi] WI, methanol, and corrosion   Marcell Gal
• [Diy_efi] WI, methanol, and corrosion   Axel Rietschin
• [Diy_efi] Grounding issues with Honda ECU   Djfreggens at aol.com
• [Diy_efi] Injector operation   Djfreggens at aol.com
• [Diy_efi] Re: hack for the 4 cylinder   Robert W Hughes
• [Diy_efi] Grounding issues with Honda ECU   Eck, Joel (Houston)
• [Diy_efi] Injector operation   bill.shurvinton at nokia.com
• [Diy_efi] WI, methanol, and corrosion   bill.shurvinton at nokia.com
• [Diy_efi] Injector operation   Djfreggens at aol.com
• [Diy_efi] Injector operation   bill.shurvinton at nokia.com
• [Diy_efi] WI, methanol, and corrosion   Adam Wade
• [Diy_efi] turbo "throttling"   Erik Jacobs
• [Diy_efi] WI, methanol, and corrosion   Axel Rietschin
• [Diy_efi] Injector operation   JET
• [Diy_efi] WI, methanol, and corrosion   JET
• [Diy_efi] WI, methanol, and corrosion   Adam Wade
• [Diy_efi] Injector operation   Adam Wade
• [Diy_efi] Injector operation   Tlsalt at aol.com
• [Diy_efi] WI, methanol, and corrosion   Grant Beaty
• [Diy_efi] WI, methanol, and corrosion   Dave Dahlgren
• [Diy_efi] WI, methanol, and corrosion   Axel Rietschin
• [Diy_efi] Injector operation   peterw
• [Diy_efi] WI, methanol, and corrosion   William Shurvinton
• [Diy_efi] Injector operation   Allyn
• [Diy_efi] WI, methanol, and corrosion   JET
• [Diy_efi] WI, methanol, and corrosion   William Shurvinton
• [Diy_efi] WI, methanol, and corrosion   William Shurvinton
• [Diy_efi] WI, methanol, and corrosion   Bernd Felsche
• [Diy_efi] Re: WI, methanol, and corrosion (William   Startled Jackrabbit
• [Diy_efi] could i have multiple bad injectors? (UPDATE)   Toyota Supra
• [Diy_efi] RE: More about the GM HEI and AMC V8   Shannen Durphey
• [Diy_efi] WI, methanol, and corrosion   Joseph Obernberger
• [Diy_efi] WI, methanol, and corrosion   Greg Hermann
• [Diy_efi] Injector operation   peterw
• [Diy_efi] WI, methanol, and corrosion   Djfreggens at aol.com
• [Diy_efi] Re: WI, methanol, and corrosion (William   Greg Hermann
• [Diy_efi] WI, methanol, and corrosion   Greg Hermann
• [Diy_efi] WI, methanol, and corrosion   Greg Hermann
• [Diy_efi] WI, methanol, and corrosion   Greg Hermann
• [Diy_efi] WI, methanol, and corrosion   Greg Hermann
• [Diy_efi] Help, simple question.   Chuck Kahler
• [Diy_efi] WI, methanol, and corrosion   bill.shurvinton at nokia.com
• [Diy_efi] WI, methanol, and corrosion   Dave Dahlgren
• [Diy_efi] Injector operation   Marcell Gal
• [Diy_efi] WI, methanol, and corrosion   Greg Hermann
• [Diy_efi] WI, methanol, and corrosion   Dave Dahlgren
• [Diy_efi] Help, simple question.   Programmer
• [Diy_efi] turbo "throttling"   Dan D'Andrea
• [Diy_efi] turbo "throttling"   Erik Jacobs
• [Diy_efi] Question about ECMs   billmiranda at netscape.net
• [Diy_efi] Extra Injector activated by pressure.   Ricardo Trombetta
• [Diy_efi] WI into exhaust manifold....   Guncotton
• [Diy_efi] Extra Injector activated by pressure.   Djfreggens at aol.com
• [Diy_efi] Question about ECMs   Djfreggens at aol.com
• [Diy_efi] turbo "throttling"   Gerard
• [Diy_efi] turbo "throttling"   Dan D'Andrea
• [Diy_efi] UEGO calibration resistors   Jeffrey Watson
• [Diy_efi] 25A Solid State Relay   FR Wilk
• [Diy_efi] WI into exhaust manifold....   John Stricker
• [Diy_efi] 25A Solid State Relay   bcroe at juno.com
• [Diy_efi] Question about ECMs   Shannen Durphey
• [Diy_efi] Question about ECMs   WEG1192 at aol.com
• [Diy_efi] Re: hack for the 4 cylinder   WEG1192 at aol.com
• [Diy_efi] unsubscirbe   stephen kelly
• [Diy_efi] Re: hack for the 4 cylinder   Dan Griffin
• [Diy_efi] pressure drop, cooling   Marcell Gal
• [Diy_efi] Re: hack for the 4 cylinder   Djfreggens at aol.com
• [Diy_efi] ECM question   billmiranda at netscape.net
• [Diy_efi] ECM question   Robert A. Ward
• [Diy_efi] Extra Injector activated by pressure.   Ricky
• [Diy_efi] turbo "throttling"   Bill SHURVINTON
• [Diy_efi] pressure drop, cooling   Grant Beaty
• [Diy_efi] Leaking injectors   Bill Washington
• [Diy_efi] WI into exhaust manifold....   Hugh Keir
• [Diy_efi] ECM question   WEG1192 at aol.com
• [Diy_efi] Leaking injectors   Brian Dessent
• [Diy_efi] Newbie here guys- help on caddy/Pontiac ECU's   SoccrplayrGTP at aol.com
• [Diy_efi] Leaking injectors   Toyota Supra
• [Diy_efi] Newbie here guys- help on caddy/Pontiac ECU's   JET
• [Diy_efi] Newbie here guys- help on caddy/Pontiac ECU's   SoccrplayrGTP at aol.com
• [Diy_efi] SEARCH: BAD REQUEST????   SoccrplayrGTP at aol.com
• [Diy_efi] turbo "throttling"   Dan D'Andrea
• [Diy_efi] SEARCH: BAD REQUEST????   steve ravet
• [Diy_efi] turbo "throttling"   bill.shurvinton at nokia.com
• [Diy_efi] ECM question   Shannen Durphey
• [Diy_efi] ECM question   Shannen Durphey
• [Diy_efi] ECM question   steve ravet
• [Diy_efi] SEARCH: BAD REQUEST????   SoccrplayrGTP at aol.com
• [Diy_efi] ECM question   Brian Dessent
• [Diy_efi] ECM question   Shannen Durphey
• [Diy_efi] Injector operation   Mike
• [Diy_efi] WI, methanol, and corrosion   Mike
• [Diy_efi] WI, methanol, and corrosion   Derek
• [Diy_efi] WI, methanol, and corrosion   bill.shurvinton at nokia.com
• [Diy_efi] WI into exhaust manifold....   Mike
• [Diy_efi] unsubscirbe   Mark Bowers & Family
• [Diy_efi] Speed-density vs. MAF/MAP...   Adam Wade
• [Diy_efi] Speed-density vs. MAF/MAP...   Jeffrey Engel
• [Diy_efi] Speed-density vs. MAF/MAP...   Adam Wade
• [Diy_efi] Speed-density vs. MAF/MAP...   Perry Harrington
• [Diy_efi] Speed-density vs. MAF/MAP...   Adam Wade
• [Diy_efi] ECM Programming Question   billmiranda at netscape.net
• [Diy_efi] WI, methanol, and corrosion   Derek
• [Diy_efi] Design of a simple LPG injection system   Lea and Peter Sterling
• [Diy_efi] Speed-density vs. MAF/MAP...   Perry Harrington
• [Diy_efi] WI, methanol, and corrosion   Adam Wade
• [Diy_efi] Design of a simple LPG injection system   JET
• [Diy_efi] Design of a simple LPG injection system   Adam Wade
• [Diy_efi] Speed-density vs. MAF/MAP...   Bill SHURVINTON
• [Diy_efi] Speed-density vs. MAF/MAP...   Perry Harrington
• [Diy_efi] Speed-density vs. MAF/MAP...   Stewart Prince
• [Diy_efi] injector fireing   killroy
• [Diy_efi] Speed-density vs. MAF/MAP...   Shannen Durphey
• [Diy_efi] Speed-density vs. MAF/MAP...   Adam Wade
• [Diy_efi] injector fireing   Adam Wade
• [Diy_efi] Design of a simple LPG injection system   efi student
• [Diy_efi] Design of a simple LPG injection system   Adam Wade
• [Diy_efi] Design of a simple LPG injection system   efi student
• [Diy_efi] Speed-density vs. MAF/MAP...   Adam Wade
• [Diy_efi] Speed-density vs. MAF/MAP...   Adam Wade
• [Diy_efi] Speed-density vs. MAF/MAP...   Adam Wade
• [Diy_efi] Speed-density vs. MAF/MAP...   Perry Harrington
• [Diy_efi] Speed-density vs. MAF/MAP...   Adam Wade
• [Diy_efi] Speed-density vs. MAF/MAP...   Grant Beaty
• [Diy_efi] Speed-density vs. MAF/MAP...   Adam Wade
• [Diy_efi] Speed-density vs. MAF/MAP...   Bill SHURVINTON
• [Diy_efi] Speed-density vs. MAF/MAP...   Marcell Gal
• [Diy_efi] DIY_EFI: WI in exhaust manifold pre-turbo   Ohio Benz
• [Diy_efi] Retrofit of GM ESC   Derek Atkin
• [Diy_efi] injector fireing   Brian Dessent
• [Diy_efi] DIY_EFI: WI in exhaust manifold pre-turbo   Brian Dessent
• [Diy_efi] WI, methanol, and corrosion   Axel Rietschin
• [Diy_efi] Cleaning injectors   Chris McKinnon
• [Diy_efi] WI, methanol, and corrosion   Adam Wade
• [Diy_efi] WI, methanol, and corrosion   Bill SHURVINTON
• [Diy_efi] WI, methanol, and corrosion   Axel Rietschin
• [Diy_efi] WI, methanol, and corrosion   Greg Hermann
• [Diy_efi] Re: Retrofit of GM ESC (Derek Atkin)   Dan Zorde
• [Diy_efi] WI, methanol, and corrosion   Adam Wade
• [Diy_efi] WI, methanol, and corrosion   Axel Rietschin
• [Diy_efi] WI, methanol, and corrosion   Axel Rietschin
• [Diy_efi] Retrofit of GM ESC   Shannen Durphey
• [Diy_efi] Compressor "surge ring"   Grant Beaty
• [Diy_efi] 4G63 (1st generation) knock sensor   Grant Beaty
• [Diy_efi] Speed-density vs. MAF/MAP...   Marcell Gal
• [Diy_efi] Speed-density vs. MAF/MAP...   Adam Wade
• [Diy_efi] Speed-density vs. MAF/MAP...   Marcell Gal
• [Diy_efi] Speed-density vs. MAF/MAP...   Adam Wade
• [Diy_efi] 4G63 (1st generation) knock sensor   Hugo Normand
• [Diy_efi] Compressor "surge ring"   Mark
• [Diy_efi] Speed-density vs. MAF/MAP...   Mike
• [Diy_efi] Compressor "surge ring"   Grant Beaty
• [Diy_efi] Speed-density vs. MAF/MAP...   Mike
• [Diy_efi] Comments ? neat marine engine !   Mike
• [Diy_efi] Cleaning injectors   Mike
• [Diy_efi] Speed-density vs. MAF/MAP...   Klaus Allmendinger
• [Diy_efi] Compressor "surge ring"   Toyota Supra
• [Diy_efi] pwm explanation   Bino Lardo
• [Diy_efi] pwm explanation   steve ravet
• [Diy_efi] Welding on cars w/ ECU's??   Chris Spies, ATI ProCharger
• [Diy_efi] pwm explanation   Bino Lardo
• [Diy_efi] pwm explanation   Marcell Gal
• [Diy_efi] Welding on cars w/ ECU's??   Toyota Supra
• [Diy_efi] Welding on cars w/ ECU's??   Perry Harrington
• [Diy_efi] Welding on cars w/ ECU's??   Eck, Joel (Houston)
• [Diy_efi] Welding on cars w/ ECU's??   Jon Prevost
• [Diy_efi] Welding on cars w/ ECU's??   Matt Porritt
• [Diy_efi] pwm explanation   steve ravet
• [Diy_efi] Welding on cars w/ ECU's??   Programmer
• [Diy_efi] Welding on cars w/ ECU's??   Clint
• [Diy_efi] Welding on cars w/ ECU's??   Chris McKinnon
• [Diy_efi] Speed-density vs. MAF/MAP...   Bernd Felsche

Last message date: Fri Jan 31 23:50:20 GMT 2003
Archived on: Thu May 30 06:02:54 GMT 2013

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...