[Diy_efi] RB26 GTR stuff

[Matt Porritt]

The GT2450 on paper looks bad yes.. But they work VERY well.
I run them on GTRs and on 2ls also (1x on 2l ;)
I use the GT25s with the TO4S comp and 0.7 cover.. Very mismatched on paper,
but excelent result.
I know of a couple of people who have been disappointed with the 2530s and
now which they had gone to 2540 or eqiv.
-- 
Matt Porritt
RC Race Cars and Supplies
ICQ #22776813


On 16/1/03 8:54 AM Hugh Keir wrote

> Matt,
> 
> The exhaust housing is .64 AR, 53.8mm x 47mm turbine. Compressor Housing is
> .6 AR, 51.2 mm x 71.1mm compressor.
> 
> The 2530 has 47.7mm  x  60.1mm compressor
> 
> The 2540 has 51.2mm x  71.1mm compressor which is slightly smaller than the
> GT-RS spec above. Many people consider the 2540 a badly designed and laggy
> turbo, whereas the GT-RS spec is supposed to flow more and have less lag,


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi