Subject: Re: [Diy_efi] This turbo assist stuff, Questions!

[arnie]

Won't give any suggestions as to what to put into exhaust, but for 
intake, look to achieve in your case, 7-8 oz. (app.225-250 ml.) /min.
Don't be afraid to flog and/or experiment.  If attempting to 'drown' 
motor,  :)  consider a max of 20% (of total combined liquid charge) 
being H2O.  YMMV

GAS

----- Original Message ----- 
From: "Ohio Benz" <ohiobenz at yahoo.com>
To: <diy_efi at diy-efi.org>
Sent: Thursday, January 02, 2003 11:30 AM
Subject: Subject: Re: [Diy_efi] This turbo assist stuff, Questions!


> Jumping back into the original topic - turbo spooling
> assist....
> I would like to try the WI into the exhaust manifold
> prior to turbo.  Plans had been for WI into the intake
> post IC, after about 5-7 psi was reached. (the CR is
> 10:1) So it would almost seem a natural to shoot WI
> into the exhaust under WOT until reaching 5 psi, then
> shuttling the valve over to intake injection.
> Does anyone have any suggestions for flow rate?? -
> running a 2.0 with agressive ported 16v head and a T3
> 63AR turbine housing. Pump will be a 100psi Shurflo.
> 
> Thanks!!



_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi