[Diy_efi] Re: GDI and why

efi student efi.student at sbcglobal.net
Sun Jan 12 20:39:43 GMT 2003


Excellent info, thanks.

It just so happens I am enrolled in school as a full time student, so
membership is not a big expense at all.  Where should I start looking?

Lance

-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org] =
On
Behalf Of Phil Lamovie
Sent: Sunday, January 12, 2003 8:19 AM
To: List for general do-it-yourself EFI talk
Subject: [Diy_efi] Re: GDI and why



Hi All,

> I thought the concept was rather like a diesel.  Relatively high
pressure,
> fuel introduced as near the time of ignition as possible to reduce
the
> opportunity to detonate.  I would expect that time to be long after
the
> intake valve has closed.  Am I not understanding something about
GDI?

The purpose of GDI is to achieve things that cannot be accomplished by

indirect injection.

There is no factory system that uses less than two discrete injection =
events
per compression. The most interesting use 4.

A fuel pulse equal to 70  or 80% of total required is applied after the
intake valve is closed. This amount of fuel would in some engines reach =
an
A/F ratio of 25:1. Clearly a well mixed but incombustible mixture.

Just before ignition the 2nd ( or 3rd or 4th) injection is used to =
create a
rich zone near the plug. This rich zone fires easily and is used as an

ignition source for the ultralean 25:1.

This is the simplest strategy and is known as stratified charge =
injection.

Good news is it has 20 to 30 % fuel saving and has better peak power to
boot.

Bad news is that it complicates things in the ECU area with dozens of =
extra
algorithms and subsequent calculation.

The "really trick" systems are stuck waiting for 48 volt vehicles in =
about
18 months time. This will take the injection pressures to new and =
dizzying
heights.

There is a great deal of info available from the SAE if you have the =
cash
and the Patent office in GIF form if you don't.

HTH

Phil


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org http://www.diy-efi.org/mailman/listinfo/diy_efi


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi



More information about the Diy_efi mailing list