[Diy_efi] Water metanol turbo assist - was Argon turbo

[arnie]

What actual street operating setups are you aware of, that can function
durability wise, with HALF the amount of liquid charge (in the intake)
being H2O, let alone 70%?  Concerned mind wants to know.

GAS

----- Original Message -----
From: "Greg Hermann" <bearbvd at mindspring.com>
To: <diy_efi at diy-efi.org>
Sent: Saturday, January 04, 2003 9:49 AM
Subject: Re: [Diy_efi] Water metanol turbo assist - was Argon turbo
>
> I was the one who did the calcs for quantity originally, don't remember
the
> numbers, tho. Would start experimenting at about 15% of fuel mass flow
> rate for straight H2O (into the exhaust).
>
> For injecting into the intake (straight H2O again), depends on compression
> ratio, but as high aa 70% of fuel mass flow might be of help. Sneak up on
> it, though.
>
> Greg



_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi