[Diy_efi] Pre-TB water/alky nozzle orientation

[Matt Porritt]

On 7/1/03 2:10 PM Mike wrote

> The conventional wisdom seems to be to fire them downstream as you
> suggest but directly at the intake valve as it aids flow into the
> chamber and helps cool the intake valve a little, several manufacturers
> do it this way,

Close to the valve if you are seeking hi rev power.
Same with hi rise manifolds for v8s.. Further from the ports, greater torque
but loss of top end.
-- 
Matt Porritt
RC Race Cars and Supplies
ICQ #22776813


> 
>> Everyone else- These are "MY" opinions. I'm offering advise as requested.. I
>> really don't care for a war as we've had on the water inj.
> 
> Yeah true,
> but we can advise to take the implicit advice of manufacturers... ;)


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi