[Diy_efi] Re: hack for the 4 cylinder

Mon Jan 27 17:32:01 GMT 2003

--===============1511422939367284==
Content-Type: multipart/alternative;
	boundary="part1_1c3.4130bb7.2b66c8ee_boundary"

--part1_1c3.4130bb7.2b66c8ee_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit

In a message dated 1/27/2003 4:37:11 PM !!!First Boot!!!, hs88s15 at hotmail.com 
writes:

> Have you looked at the 90-92 2.5 L TBI  Lumina's? according to Ludis' pages 
> its got a p-4  '7730...Im not sure if its distributor or not, I know all 
> the 
> 2.5's I saw at pullapart had dissy's... Also might check an 87 buik skyhawk 
> 
> for a 2.5... Although all the 2.0L I saw were dis...Didnt I read somewhere 
> someone retrofitted a dis ecm to run a distributor eng?
> 

these engine use DIS.. 2.0-2.5tbi except for the 86-91 2.0ohc sunbird 
engine.the only option is to use a 1227749 from a sunbird.it can do either a 
1 or 2 bar sensor and has plenty ofprogramming tools. its also a dizzy code 
so it should be fne. you can also run this code in a 730 if you use a 749 
pinout. these ecms are almost identical except for the output fets and a quad 
driver.  

--part1_1c3.4130bb7.2b66c8ee_boundary
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: 7bit

<HTML>In a message dated 1/27/2003 4:37:11 PM !!!First Boot!!!, hs88s15 at hotmail.com writes: 
 
 
<BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">Have you looked at the 90-92 2.5 L TBI&nbsp; Lumina's? according to Ludis' pages 
its got a p-4&nbsp; '7730...Im not sure if its distributor or not, I know all the 
2.5's I saw at pullapart had dissy's... Also might check an 87 buik skyhawk 
for a 2.5... Although all the 2.0L I saw were dis...Didnt I read somewhere 
someone retrofitted a dis ecm to run a distributor eng? 
</BLOCKQUOTE> 
 
these engine use DIS.. 2.0-2.5tbi except for the 86-91 2.0ohc sunbird engine.the only option is to use a 1227749 from a sunbird.it can do either a 1 or 2 bar sensor and has plenty ofprogramming tools. its also a dizzy code so it should be fne. you can also run this code in a 730 if you use a 749 pinout. these ecms are almost identical except for the output fets and a quad driver.&nbsp; </HTML>

--part1_1c3.4130bb7.2b66c8ee_boundary--

--===============1511422939367284==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi

--===============1511422939367284==--