[Diy_efi] Pre-TB water/alky nozzle orientation

[Mike]

I could do with a couple or maybe 4 in Perth, Western Australia
does anyone want to participate in getting a few over to save
on freight - Bernd  ?

rgds

mike



At 07:58 PM 1/10/03 -0500, you wrote:
>I like them a lot - I think they mist very well.  I can't really comment on
>which is better - but I'm under the impression that using fuel injectors to
>inject water may lead to premature injector failure.  If I wanted additional
>fuel, I would use fuel injectors - for water these mini misting nozzles work
>great.  They can be found at http://www.mcmaster.com - search for nozzle and
>then click on 'Adjustable Spray Angle High-Pressure Nozzle'.  Part numbers of
>3178K61 through 3178K77 for the full cone type and they come in flow
ratings of
>1 to 15GPH at 100psi.
>If anyone cannot view the videos in WMV format, I can convert them to MPG or
>whatever - just let me know.
>Thanks.
>http://cybrina.mine.nu
>                                                            joeo
>
>Brian Michalk wrote:
>
>> How do you like those nozzles?
>> I ogled them for some time for use as my backup fuel injectors.
>>
>> On my aircraft engine, I decided to go with the Bosch CIS injectors for
>> backup.  In your opinion would their nozzles work for such a situation?
>>
>> Remember, this is for backup, to make enough power to get me on the ground
>> safely.  I have no concerns over precise mixture, even distribution, or
>> maximum power output.  All I want is reliability.
>>
>> Which part numbers are you using?
>>
>> > -----Original Message-----
>> > From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
>> > Behalf Of Joseph Obernberger
>> > Sent: Thursday, January 09, 2003 11:31 PM
>> > To: diy_efi at diy-efi.org
>> > Subject: Re: [Diy_efi] Pre-TB water/alky nozzle orientation
>> >
>> >
>> > Kinda late to the thread, but I recently took some video footage of my
DIY
>> > water injection system spraying inside the throttle body.  I'm
>> > using mcmaster
>> > car mini misting nozzles, and they spray perpendicular to the air
>> > flow.  This
>> > setup seems to be working well for me, but I'm wondering if there are
>> > suggestions?
>> > Thanks!
>> > http://cybrina.mine.nu/Description.htm
>> > http://cybrina.mine.nu
>> >
>> > joeo
>>
>> _______________________________________________
>> Diy_efi mailing list
>> Diy_efi at diy-efi.org
>> http://www.diy-efi.org/mailman/listinfo/diy_efi
>
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>http://www.diy-efi.org/mailman/listinfo/diy_efi
>
>

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi