[Diy_efi] PC-laptop based efi

[peterw]

> My cnc runs under nt 4.0 sp 6 with a real time add on I will have to see
what it
> is but I do believe it to be QNX. The pc updates the motor controllers in
the
> millisecond range as the largest move it will make without an up date is
around
> 3 msec..
> Dave Dahlgren
>
>
Yup NT with a realtime addin certainly does work. I have experience of this
with industrial process control. Howver it didn't like to run continuously
tho and used to hiccup every so often. This was not good for a production
line that had to run 24hrs per day.

Peter




_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi