[Diy_efi] Lucas Digital-P

[arnie]

----- Original Message -----
From: "Barry" <sy2th at direcway.com>
To: "List for general do-it-yourself EFI talk" <diy_efi at diy-efi.org>
Sent: Friday, July 11, 2003 6:44 AM
Subject: RE: [Diy_efi] Lucas Digital-P


> Might want to check into the Aquamist "High Speed Valve" - wired
> in parallel w/ any injector (assuming batch), pulses in time w/ them.
> Good up to at least 225psi (I run 200); I'm feeding 2 x 1.0mm jets;
> that equals 25% of fuel volume in injected liquid in my app (high
> boost Syclone).  I use 1:1 methanol/water supplied by a ShurFlo ag
> chemical pump, not the pricey Aquamist unit.

A 200 psi Shurflo?  Hmmm.

> Granted, its not 'PFI', as the two jets are just ahead of the throttle
> blades.

This is gonna be a dumb ?.   PFI ?

> 2¢, FWIW, etc.  Just another idea.

> Barry






_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi