[Diy_efi] Lucas Digital-P

[Barry]

brad at kcsaab.com sells the ShurFlo as well as all the Aquamist bits & pieces=
=20
- excellent guy to deal with.

"not PFI" meaning there's not a water or alky injector for each fuel=20
injector, I use just the two additional jets in the throttle body=20
("TBI").  Dunno if you want one water injector per fuel injector right @=20
the intake port - sounds like you might.

Barry

At 07:25 AM 7/11/03 -0500, arnie wrote:

>----- Original Message -----
From: "Barry" <sy2th at direcway.com>
>To: "List for general do-it-yourself EFI talk" <diy_efi at diy-efi.org>
>Sent: Friday, July 11, 2003 6:44 AM
>Subject: RE: [Diy_efi] Lucas Digital-P
>
>
> > Might want to check into the Aquamist "High Speed Valve" - wired
> > in parallel w/ any injector (assuming batch), pulses in time w/ them.
> > Good up to at least 225psi (I run 200); I'm feeding 2 x 1.0mm jets;
> > that equals 25% of fuel volume in injected liquid in my app (high
> > boost Syclone).  I use 1:1 methanol/water supplied by a ShurFlo ag
> > chemical pump, not the pricey Aquamist unit.
>
>A 200 psi Shurflo?  Hmmm.
>
> > Granted, its not 'PFI', as the two jets are just ahead of the throttle
> > blades.
>
>This is gonna be a dumb ?.   PFI ?
>
> > 2=A2, FWIW, etc.  Just another idea.
>
> > Barry
>
>
>
>
>
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>http://www.diy-efi.org/mailman/listinfo/diy_efi


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi