[Diy_efi] Lucas Digital-P

[arnie]

OK.... and the 200 psi Shurflow?  Wasn't aware (according to
their site anyway) such a high pressure pump was available.
Doesn't sound like an off the shelf item to me.  Hmmm.

GAS

----- Original Message -----
From: "Barry" <sy2th at direcway.com>
To: "List for general do-it-yourself EFI talk" <diy_efi at diy-efi.org>
Sent: Friday, July 11, 2003 9:21 AM
Subject: Re: [Diy_efi] Lucas Digital-P


brad at kcsaab.com sells the ShurFlo as well as all the Aquamist
bits & pieces excellent guy to deal with.

"not PFI" meaning there's not a water or alky injector for each
fuel injector, I use just the two additional jets in the throttle body
("TBI").  Dunno if you want one water injector per fuel injector
right @ the intake port - sounds like you might.

Barry

At 07:25 AM 7/11/03 -0500, arnie wrote:

>----- Original Message -----
From: "Barry" <sy2th at direcway.com>
>To: "List for general do-it-yourself EFI talk" <diy_efi at diy-efi.org>
>Sent: Friday, July 11, 2003 6:44 AM
>Subject: RE: [Diy_efi] Lucas Digital-P
>
>
> > Might want to check into the Aquamist "High Speed Valve"
> > wired in parallel w/ any injector (assuming batch), pulses in
> > time w/ them.  Good up to at least 225psi (I run 200); I'm
> > feeding 2 x 1.0mm jets; that equals 25% of fuel volume in
> > injected liquid in my app (high boost Syclone).  I use 1:1
> > methanol/water supplied by a ShurFlo ag chemical pump,
> > not the pricey Aquamist unit.
>
>A 200 psi Shurflo?  Hmmm.
>
> > Granted, its not 'PFI', as the two jets are just ahead of the throttle
> > blades.
>
>This is gonna be a dumb ?.   PFI ?
>
> > 2¢, FWIW, etc.  Just another idea.
>
> > Barry



_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi