[Diy_efi] Lucas Digital-P

[Daniel R. Nicoson]

Matt,

We were discussing one injector per port, v-8.

Steve mentioned that efi332 may have some circuits posted.  I'll check that
out too.

Thanks,

Dan

-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
Behalf Of Matt Porritt
Sent: Friday, July 11, 2003 1:24 AM
To: DIY-EFI
Subject: Re: [Diy_efi] Lucas Digital-P


I'll have a look through my backups here.
I have a schematic for a additional injector diver that if you duplicate it
for as many inj as you require. Hoy many extra are you looking at running?
The other option is a stand alone piggyback unit with say 4 drivers in which
you can map the duty cycle etc based on the inputs you feed it.

On 11/7/03 4:39 PM Daniel R. Nicoson wrote

> Matt,
>
> That would be great.  Our concept is to inject water based on the PW being
> delivered to the fuel injector.  This would automatically deliver a given
> percentage of water vs fuel.  So even if we just used the EEC delivered PW
> as a signal to tell the separate driver when to turn on and off it would
be
> very useful.


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi