[Diy_efi] Lucas Digital-P

[Barry]

ShurFlo's rating is 150psi, but it will do 225+.  Don't use its integral 
pressure switch, way too much hysteresis - I use a machine tool ($$$) 
pressure switch that goes on @ 190psi & off @ 200psi - nice, tight 
control.  ShurFlo's model # is: 8030-813-239

Barry

At 09:37 AM 7/11/03 -0500, you wrote:
>OK.... and the 200 psi Shurflow?  Wasn't aware (according to
>their site anyway) such a high pressure pump was available.
>Doesn't sound like an off the shelf item to me.  Hmmm.
>
>GAS


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi