[Diy_efi] EEC-V revisited..

[Programmer]

I'd talk to someone who has actually bought the book. I've heard it's full
of very light info...nothing that'll really help you get into this.

Lyndon

----- Original Message -----
From: "Perry Harrington" <pedward at apsoft.com>
To: "List for general do-it-yourself EFI talk" <diy_efi at diy-efi.org>
Sent: Tuesday, March 18, 2003 8:43 PM
Subject: Re: [Diy_efi] EEC-V revisited..


> The book that Diabo published has some iteresting bits about reflashing
the
> EEC-V ECUs.  They have a handheld programmer that does that instead of
using
> a J3 chip.
>
> --Perry
>
> On Tue, Mar 18, 2003 at 10:39:34PM -0500, Justin Starkey @ VMP wrote:
> > right, they reflash eec5s reguarly
> > the eec4s can be done too but its not really worth it to pull the prom
and put it in a UV
> > eraser, might as well just throw a chip on it
> > Justin Starkey
> > www.VelocityMustangPerformance.com
> > **Quote Original E-Mail In Reply**
> > ----- Original Message -----
> > From: "Raymond Brantley" <raymond at iwantperformance.net>
> > To: "'List for general do-it-yourself EFI talk'" <diy_efi at diy-efi.org>
> > Sent: Tuesday, March 18, 2003 10:10 PM
> > Subject: RE: [Diy_efi] EEC-V revisited..
> >
> >
> > > Like Justin said Lyndon Fordchip has some serious Ford background.
Jerry
> > > is the main guy and brings HUGE amounts of experience to the table.
> > >
> > > I know they can and they have flashed EEC-V's for people.
> > >
> > >
> > >
> > >
> > >
> > > Thanks,
> > > Raymond
> > > www.iwantperformance.net
> > >
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]
> > > On Behalf Of Programmer
> > > Sent: Tuesday, March 18, 2003 4:18 PM
> > > To: List for general do-it-yourself EFI talk
> > > Subject: Re: [Diy_efi] EEC-V revisited..
> > >
> > >
> > > Who are "fordchip" resellers for ? Diablo, Superchips, or... ?
> > >
> > > Lyndon
> > >
> > > ----- Original Message -----
> > > From: "Raymond Brantley" <raymond at iwantperformance.net>
> > > To: <ddahlgren at snet.net>; "'List for general do-it-yourself EFI talk'"
> > > <diy_efi at diy-efi.org>
> > > Sent: Tuesday, March 18, 2003 2:57 PM
> > > Subject: RE: [Diy_efi] EEC-V revisited..
> > >
> > >
> > > > Dave you are either going to need to contact Jerry at Fordchip.com.
Or
> > >
> > > > purchase a Ford NGS, figure out how to hack the proprietary HEX
files,
> > >
> > > > put them back in an NGS friendly format and then flash the PCM. The
> > > > former idea is much cheaper :)
> > > >
> > > >
> > > >
> > > >
> > > > Thanks,
> > > > Raymond
> > > >
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: diy_efi-bounces at diy-efi.org
[mailto:diy_efi-bounces at diy-efi.org]
> > > > On Behalf Of Dave Dahlgren
> > > > Sent: Tuesday, March 18, 2003 3:23 PM
> > > > To: diy_efi at diy-efi.org
> > > > Subject: [Diy_efi] EEC-V revisited..
> > > >
> > > >
> > > >  I have poured over the archives and found nothing new on EEC-V
stuff
> > > > and am about ready to look at commercial stuff, though have no idea
> > > > where to start.
> > > > What I need to do is tune the engine fuel and spark, and then flash
> > > the
> > > > factory
> > > > ECM and have it look like I was never there. Is there anything that
> > > will
> > > > do
> > > > this? no ad in boards has to be full on stealth. And yes it is for
off
> > > > road use
> > > > as well, but still has to look factory fresh with no mods at all.
> > > > Dave Dahlgren
> > > >
> > > >
> > > > _______________________________________________
> > > > Diy_efi mailing list
> > > > Diy_efi at diy-efi.org http://www.diy-efi.org/mailman/listinfo/diy_efi
> > > >
> > > >
> > > > _______________________________________________
> > > > Diy_efi mailing list
> > > > Diy_efi at diy-efi.org
> > > > http://www.diy-efi.org/mailman/listinfo/diy_efi
> > >
> > >
> > > _______________________________________________
> > > Diy_efi mailing list
> > > Diy_efi at diy-efi.org
> > > http://www.diy-efi.org/mailman/listinfo/diy_efi
> > >
> > >
> > >
> > > _______________________________________________
> > > Diy_efi mailing list
> > > Diy_efi at diy-efi.org
> > > http://www.diy-efi.org/mailman/listinfo/diy_efi
> >
> >
> > _______________________________________________
> > Diy_efi mailing list
> > Diy_efi at diy-efi.org
> > http://www.diy-efi.org/mailman/listinfo/diy_efi
>
> --
> Perry Harrington Data Acquisition & Instrumentation, Inc
> perry at dainst dot com http://www.dainst.com/
>
> Those who would give up essential liberty to purchase a little temporary
safety
> deserve neither liberty or safety. Nor, are they likely to end up with
either.
>                              -- Benjamin Franklin
>
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://www.diy-efi.org/mailman/listinfo/diy_efi


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi